LS1TECH - Camaro and Firebird Forum Discussion

Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Stock bottom end ET's... come in!

   
Old Feb 9, 2015 | 10:00 PM
Share
  #21  
redline2k's Avatar
redline2k
10 Second Club
iTrader: (9)
 
Joined: Jan 2004
Posts: 560
Likes: 0
From: Daytona Beach, FL
Default
We have been 9.8x @ 137 on stock bottom end cam only 5.3 on spray. Sorry only video I have he was running in n/t lanes.

Reply
0
Old Feb 9, 2015 | 10:36 PM
Share
  #22  
slowlsx's Avatar
slowlsx
Thread Starter
TECH Addict
15 Year Member
iTrader: (28)
 
Joined: Sep 2008
Posts: 2,258
Likes: 0
From: Deer park
Default
Those are some clean hits! what's the combo?
Reply
0
Old Feb 10, 2015 | 06:09 AM
Share
  #23  
Rat01B4C's Avatar
Rat01B4C
Teching In
iTrader: (1)
 
Joined: Sep 2012
Posts: 36
Likes: 0
Default
6.62 @ 102 1.42 60' intake cam and exhaust car stock head stock block stock bottom end nitrous outlet plate kit
Attached Thumbnails Stock bottom end ET's... come in!-image.jpg  
Reply
0
Old Feb 10, 2015 | 06:31 AM
Share
  #24  
redline2k's Avatar
redline2k
10 Second Club
iTrader: (9)
 
Joined: Jan 2004
Posts: 560
Likes: 0
From: Daytona Beach, FL
Default
Originally Posted by slowlsx
Those are some clean hits! what's the combo?
5.3 cam only, victor jr, csu 750 cfm carb, induction solutions single bar plate, th400, upr suspension, and strange shocks. I am not sure of race weight on this one.
Last edited by redline2k; Feb 10, 2015 at 07:47 AM.
Reply
0
Old Feb 10, 2015 | 08:33 AM
Share
  #25  
Petey-Pop-383's Avatar
Petey-Pop-383
On The Tree
 
Joined: Jan 2013
Posts: 197
Likes: 1
Default
Slowlsx

Carb Setup - Old 950HP - Out of the box LS3's with springs.

Reply
0
Old Feb 10, 2015 | 09:51 PM
Share
  #26  
WE TODD DID's Avatar
WE TODD DID
TECH Fanatic
iTrader: (2)
 
Joined: Feb 2007
Posts: 1,627
Likes: 290
Default
Doing a little testing here..

Reply
0
Old Feb 12, 2015 | 01:04 AM
Share
  #27  
stock4.8's Avatar
stock4.8
Teching In
 
Joined: Jul 2013
Posts: 43
Likes: 0
From: Eureka, Montana
Default
Originally Posted by redline2k
5.3 cam only, victor jr, csu 750 cfm carb, induction solutions single bar plate, th400, upr suspension, and strange shocks. I am not sure of race weight on this one.
How much were you spraying at it?
Reply
0
Old Feb 12, 2015 | 02:57 PM
Share
  #28  
dekan513's Avatar
dekan513
Launching!
iTrader: (2)
 
Joined: Aug 2012
Posts: 270
Likes: 0
From: pikeville , ky
Default
Reply
0
Old Feb 12, 2015 | 05:46 PM
Share
  #29  
sbf's Avatar
sbf
TECH Enthusiast
10 Year Member
Liked
 
Joined: Dec 2012
Posts: 563
Likes: 3
From: Wilson n.c.
Default
Originally Posted by Petey-Pop-383
9.42@142.7mph 1.3460 foot
78malibu 2 door 3405lbs.
SBE Lq4, LS3's,vic jr, no flycut pistons, .028 jet in fogger.
1.80 glide, 4.10's 12bolt, 275 Non-Pro DR's

what was your 1/8 et
Reply
0
Old Feb 12, 2015 | 09:37 PM
Share
  #30  
redline2k's Avatar
redline2k
10 Second Club
iTrader: (9)
 
Joined: Jan 2004
Posts: 560
Likes: 0
From: Daytona Beach, FL
Default
Originally Posted by stock4.8
How much were you spraying at it?
250 Pump gas on motor and 118 in stand alone.
Reply
0
Old Feb 13, 2015 | 09:10 AM
Share
  #31  
Petey-Pop-383's Avatar
Petey-Pop-383
On The Tree
 
Joined: Jan 2013
Posts: 197
Likes: 1
Default
5.98@115
Reply
0
Old Feb 13, 2015 | 09:58 AM
Share
  #32  
Tuskyz28's Avatar
Tuskyz28
TECH Veteran
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Sep 2014
Posts: 4,891
Likes: 703
From: Mississippi
Default
Originally Posted by GIMPY02
I've gone a 9.8 on a 150 shot with a 1.27 60ft. Never scaled the car its a cam only 346 ls6 intake and nitrous outlet plate th400 with transbrake Midwest converter.
I keep coming back to this thread just to look at the Camaro catching some air time!!
Reply
0
Old Feb 16, 2015 | 08:08 AM
Share
  #33  
richard david's Avatar
richard david
On The Tree
 
Joined: Mar 2007
Posts: 165
Likes: 0
From: Texas
Default
9.55 at 143 with stock bottom end 346 with unported 243 heads on a 125shot but my truck only weighed 3000lbs
Reply
0
Old Feb 16, 2015 | 03:41 PM
Share
  #34  
sbf's Avatar
sbf
TECH Enthusiast
10 Year Member
Liked
 
Joined: Dec 2012
Posts: 563
Likes: 3
From: Wilson n.c.
Default
Originally Posted by richard david
9.55 at 143 with stock bottom end 346 with unported 243 heads on a 125shot but my truck only weighed 3000lbs
have u tried the new motor yet
Reply
0
Old Feb 16, 2015 | 07:18 PM
Share
  #35  
richard david's Avatar
richard david
On The Tree
 
Joined: Mar 2007
Posts: 165
Likes: 0
From: Texas
Default
Put the new motor in a 95 mustang, it ran a 9.44 at 142
Reply
0
Old Feb 16, 2015 | 09:47 PM
Share
  #36  
GIMPY02's Avatar
GIMPY02
Launching!
 
Joined: Sep 2011
Posts: 206
Likes: 0
Default
Originally Posted by ragtopz28

Are you truly SBE (rod bolts)? I don't dare spray mine more that 150...
Yes. Oil pan has never been off. Has 67k on the motor
Reply
0
Old Feb 16, 2015 | 09:51 PM
Share
  #37  
GIMPY02's Avatar
GIMPY02
Launching!
 
Joined: Sep 2011
Posts: 206
Likes: 0
Default
Originally Posted by Tuskyz28

I keep coming back to this thread just to look at the Camaro catching some air time!!
Wish I had the pic of it when it went on the bumper. trans broke and yeah was an expensive day...
Reply
0
Old Feb 18, 2015 | 10:35 AM
Share
  #38  
danny_6725's Avatar
danny_6725
Staging Lane
iTrader: (10)
 
Joined: Nov 2014
Posts: 73
Likes: 0
Default
nice numbers
Reply
0
Old Feb 18, 2015 | 10:36 AM
Share
  #39  
danny_6725's Avatar
danny_6725
Staging Lane
iTrader: (10)
 
Joined: Nov 2014
Posts: 73
Likes: 0
Default
wonder what i'll run in my lq4/afr rx7
Reply
0
Old Feb 18, 2015 | 10:34 PM
Share
  #40  
1320king's Avatar
1320king
TECH Apprentice
iTrader: (4)
 
Joined: Mar 2011
Posts: 331
Likes: 0
Default
lq9/ls3 head FC rx7 here. I hope i run times like these
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 10:19 AM.