Lnc 2000 2 step funtion
Thread Starter
Teching In
Joined: Aug 2016
Posts: 3
Likes: 0
Lnc 2000 2 step funtion I had a custom wire harness made by nitrous outlet and it has worked flawlessly with my timing retard function of the lnc2000 and my nos mini. I have just gotten around to hooking up the 2 step function on the lnc2000. Ispliced in the clutch switch wire to the blue/white on my clutch switch and put a 12+ wire to the other clutch switch wire. I pulled the 12+ source from my cigerette lighter power supply. The 2 step works with this set up while my nitrous is armed however the car starts on its own as soon as i turn the key one click to accessories. Attached is the wiring diagram to my harness from nitrous outlet and the diagram for the lnc2000. Looking at how to get my 2 step to work without the car turning on with the accessories on. Thanks in advance.
Thread Starter
Teching In
Joined: Aug 2016
Posts: 3
Likes: 0
Thats what i tried originally. I wired the clutch switch wire off of the harness into the white/blue i believe its different on the camaro on the 2 wire clutch switch. That didnt work so i wired a 12+ into the other wire and pulled that source from my cigerette lighter wiring. That worked but atarted the car early. I can get pictures this eve after work.
LS1Tech Sponsor
Joined: Feb 2015
Posts: 154
Likes: 0
From: Indiana
Wiring to the clutch switch Thats what i tried originally. I wired the clutch switch wire off of the harness into the white/blue i believe its different on the camaro on the 2 wire clutch switch. That didnt work so i wired a 12+ into the other wire and pulled that source from my cigerette lighter wiring. That worked but atarted the car early. I can get pictures this eve after work.
If not here is a link:
http://www.lingenfelter.com/PDFdownloads/L460145297.pdf
__________________
Jason Haines
Product & Service Solutions LLC
www.proservsolutions.com
https://www.facebook.com/proserv/
Jason Haines
Product & Service Solutions LLC
www.proservsolutions.com
https://www.facebook.com/proserv/
