Bowtiedford

iTrader: (9)

My new Fast 102 intake with the High hp runners came in and puting my Nitrous Outlet 102 dual stage plate on I noticed the runners are a lot lower compared to my stock runner Fast intake. Wondering about distribution problem? I do know after 300 I had some distribution problems on the original Fast intake.



This is the high hp runner intake



This is the stock runner intake. Runners are tucked further up. So more plenum area.

brandon6.0

iTrader: (32)

Start with a smaller shot and see how it does. Check plugs as well!!

Bowtiedford

iTrader: (9)

I don't think it will work and being a new intake I don't want to even bolt it on. Not interested in anything below 250. The plates holes are mounted on top of the plate and it would shoot directly onto those blue runners. The stock runner intake had distribution problems at 250 and abive

blk00ss

iTrader: (66)

Yeah I nipped 3 plugs when I was spraying 300 on my 102.

brandon6.0

iTrader: (32)

Disrect port!!! I wouldnt trust a plate at 300 unless it was a 4150 style

Bowtiedford

iTrader: (9)

Yep, and I burnt #2 a few times on my stock runner and I understand why. looking at the blue runners I would melt them all lol

Bowtiedford

iTrader: (9)

Yeah I was thinking of maybe going to a carb style intake with a plate or puck. Or maybe direct port on the fast 102.

baronsmith98

iTrader: (2)

I loved my Vic jr and N2O Stinger plate. Perfect distribution and hit like a ton of bricks

brandon@nitrousoutlet

iTrader: (2)

I think the distribution will end up being about the same. The hottest holes might move around though, so a proper plug reading would be in order.