Looking for a budget dry kit.
#1
Looking for a budget dry kit.
Like the title says. I'm new to nitrous. I have an engine management system and am ready to spray. Like today.
Just don't know what I need. I've done a lot of reading and my trigger finger is itching. I was ready a year ago and life put things on hold. I'm good to go now though. Any vendors want a sale?
Just don't know what I need. I've done a lot of reading and my trigger finger is itching. I was ready a year ago and life put things on hold. I'm good to go now though. Any vendors want a sale?
#2
TECH Senior Member
Try Nitrous Outlet. They do everything nitrous, and will steer you to what you need.
Trending Topics
#8
150 tops. Strictly street. I have about 450 hp and if I We r to bump fuel pressure a bit, I'm thinking I can get 150 out of the injectors with some head room for safety. The only other injectors for my throttle body are 210s! Compared to the 80s I have now. Plus I never go to the track, so I'd never be able to put it on the ground.
#10
Can't remember what functions the hp has for nitrous. But if it's a single plane 4150 intake only looking to spray 150-200. I'd be getting a $75 ebay perimeter plate, feed line in length you need, any small n20 noid, 12" line from noid to plate, cap on fuel side of plate in case plate leaks, heater and switch and a new or used bottle.
#12
12 Second Club
iTrader: (10)
Join Date: Sep 2005
Location: From Ohio now in that state up north
Posts: 948
Received 0 Likes
on
0 Posts
If you are looking dry and you have holly Efi it’s hard to pass up the value on a single stage direct port from Nitrous Outlet.
http://www.nitrousoutlet.com/direct-...ngle-rail.html
If you want just a super basic kit you can get that for pretty cheap but for an extra couple hundred bucks you get a lot of room to grow.
http://www.nitrousoutlet.com/direct-...ngle-rail.html
If you want just a super basic kit you can get that for pretty cheap but for an extra couple hundred bucks you get a lot of room to grow.
#14
FormerVendor
iTrader: (2)
Like the title says. I'm new to nitrous. I have an engine management system and am ready to spray. Like today.
Just don't know what I need. I've done a lot of reading and my trigger finger is itching. I was ready a year ago and life put things on hold. I'm good to go now though. Any vendors want a sale?
Just don't know what I need. I've done a lot of reading and my trigger finger is itching. I was ready a year ago and life put things on hold. I'm good to go now though. Any vendors want a sale?
#15
FormerVendor
iTrader: (1)
Join Date: Nov 2008
Location: Santa Ana, CA. USA
Posts: 2,157
Likes: 0
Received 17 Likes
on
17 Posts
Water Thunder NOS Champ
Hi SS, I help Dave at Water Thunder in Melborn, FL., my customer
He is the fastest Air Boat, uses NOS, wins the races.
The ONLY requirement is the Tank, Solenoid, line for a dry system.
I can provide these items, I like Nitrous Supply, Mike Thermos.
Lance 949-250-1797
He is the fastest Air Boat, uses NOS, wins the races.
The ONLY requirement is the Tank, Solenoid, line for a dry system.
I can provide these items, I like Nitrous Supply, Mike Thermos.
Lance 949-250-1797
#16
I don't have the money for something like that right now. Budget is key for me. 3 kids and counting. Plus I just swapped the intake. It has no2 casting bungs, but I'm not really looking to lull the intake off. It has 150 miles on it. I'm just looking for a single nozzle or plate kit. Clearance is at a premium vertically, so a plate might not work without modification. I already ordered the holley progressive solenoid driver. So I'm kinda leaning toward a single nozzle kit with the best spraying nozzle(If there is such a thing) for best distribution. Something that will cover entire 4" intake tube. I attached a couple pics of what I'm working with
#18
I appreciate the advice. But I think those plates r like $300 by themselves? I'm trying to stay around $500. And I don't k ow he tall they are, but my carb hat is almost kids g the bottom of my hood scoop. I'll be getting a single nozzle kit tomorrow. It seems like it's the best route for me to stay on budget and not have clearance issues. But, I do have a question. Since I'm on speed density, should the nozzle be placed as far up stream as possible? Thanks for the suggestions BTW.
#19
FormerVendor
iTrader: (2)
http://www.nitrousoutlet.com/x-serie...us-system.html
This will spray up to 200hp. Just stab the nozzle into that tube going to your elbow and let her rip.
This will spray up to 200hp. Just stab the nozzle into that tube going to your elbow and let her rip.