Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Nitrous Questions

Thread Tools
 
Search this Thread
 
Old 12-10-2018, 06:59 AM
  #1  
Teching In
Thread Starter
 
Schaft7's Avatar
 
Join Date: Oct 2017
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default Nitrous Questions

Hello everyone, Finally getting around to spraying my TBSS. Managed to get a used NANO system for a decent price and just need to figure out what else I need. So far I have

- 15lb bottle with nano bottle
- mount
- feed line
- purge lines and solenoid
- fuel and nitrous solenoid
- Nitrous outlet standalone fuel system
- FJO progressive nitrous controller
- Nitrous Outlet 90mm throttle plate
- Blow down tube
- Switches

Ive been grabbing bits and pieces that were needed here and there and im trying to see if im finally ready to install this or not.
Going with a 100 shot intially then up to a 150 later on. Will the FJO pull timing? First time using nitrous and im getting mixed advise from friends.
Old 12-10-2018, 01:14 PM
  #2  
Teching In
Thread Starter
 
Schaft7's Avatar
 
Join Date: Oct 2017
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Looks like ill be ordering a LNC-2000 to control the timing
Old 12-11-2018, 03:08 PM
  #3  
FormerVendor
iTrader: (2)
 
brandon@nitrousoutlet's Avatar
 
Join Date: Feb 2013
Location: Waco, TX
Posts: 1,479
Received 20 Likes on 18 Posts

Default

Originally Posted by Schaft7
Looks like ill be ordering a LNC-2000 to control the timing
Thats a good idea!

Lingenfelter LNC-2000




All times are GMT -5. The time now is 09:10 PM.