DynoTune Fully Automatic Nitrous Bottle Warmer Kit – $99!!!!
08-27-2004, 08:21 AM
#21
TECH Fanatic
iTrader: (1)
Join Date: May 2004
Location: Louisiana
Posts: 1,585
Likes: 0
Received 0 Likes
on
0 Posts
I just wanted to share this with you guys! I ordered one of the bottle warmers for $99 during the sale and although I havent hooked up yet it looks and feels to be made of quality stuff but thats not why Im posting. I dont have access to a credit card so I called "Dynotune" and asked if I could send a money order via UPS and they said yes. So I sent it next day air on the Wendsday of the sale week just to make sure it got there. The problem was the address I sent it to was their old address and they were in the process of moving from there that very week so their neighboring business was supposed to get their mail/packages but they didnt. Ups tried to deliver it for 3 days and finally they got it the next Wendsday(3 days after the sale was over) I talked to Dean and a few others at "Dynotune" and they assured me that when they get it and/or if it gets sent back to me that they would honor the $99 sale price whenever they finally get the package! Allthough that was the right thing to do I was pleased to know that they were one of those buisness that follow those types of general
buisness practices. They finalyl got it Wendsday a week later and shipped it Friday and I got it Monday! Just thought Id let you gusy know that in my opinion "Dynotune" is a safe and down to earth buisness to use! As Dean would say "Cheers"
buisness practices. They finalyl got it Wendsday a week later and shipped it Friday and I got it Monday! Just thought Id let you gusy know that in my opinion "Dynotune" is a safe and down to earth buisness to use! As Dean would say "Cheers"
08-28-2004, 11:23 AM
#22
9 Second Club
iTrader: (18)
Join Date: Feb 2004
Location: IA.
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LEATHL_WS6
Man I missed the deal again.. I always miss the good ones. No chance of this deal still being good is there?
Rob
Rob
09-06-2004, 07:10 PM
#27
LS1TECH Sponsor
Thread Starter
iTrader: (13)
Join Date: Jul 2004
Location: Massachusetts
Posts: 1,766
Likes: 0
Received 0 Likes
on
0 Posts
We may have to think about running this special again in the near future!
Thanks guys for the support!
DavidTNT, Thanks for helping out with some answers on your products!
Dean
Thanks guys for the support!
DavidTNT, Thanks for helping out with some answers on your products!
Dean
09-28-2004, 05:18 PM
#28
TECH Fanatic
iTrader: (1)
Join Date: May 2004
Location: Louisiana
Posts: 1,585
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for bringing this up from the dead but I still dont know if I got the right size AN for my heater. Dave&TNT says the F1 & F2 kit both run 6AN fitting of the bottle nut but the F1 is still a 4AN line so get the 6AN warmer. WHat exactly does that mean? If the bottle nut is 6AN how doe that connect to the F1's 4AN line? I dont have my kit installed yet but and I dont have a bottle nut but the bottle line is 4AN and it fits perfectly into the Dynotune 4AN manifold. So I assume I have the right thing. Anyone with TNT F-1 verify. Ive talked to Dynotune and regardless they said they will take care of it but I want to do so before I do install. What size bottle nut would you get for a TNT F-1 kit?
09-28-2004, 06:24 PM
#30
TECH Enthusiast
iTrader: (1)
Join Date: Feb 2004
Location: West Virginia
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
DAMN IT!! I just read this, and grabbed my credit card, and the price is now 149. Oh well, I guess I will just buy a used one.
Is there any possibility that if 5 or so of us want one, we can still get it for this price??
Let me know, I am READY TO BUY NOW!
Is there any possibility that if 5 or so of us want one, we can still get it for this price??
Let me know, I am READY TO BUY NOW!
09-28-2004, 10:04 PM
#33
TECH Fanatic
iTrader: (1)
Join Date: May 2004
Location: Louisiana
Posts: 1,585
Likes: 0
Received 0 Likes
on
0 Posts
Ok I bought my F-1 kit used and without the bottle. I bought a brand new TNT 10# bottle but I still dont have a bottle nut. My 15' or 17' bottle line whatver the length has 4AN fittings on both sides. I have double checked this. That being said what is the correct bottle warmer manifold size that I need?
I dont know if you are saying that TNT F-1 kits coome with bottle lines with 4an on the n20 noid side and 6an on the bottle nut side or what but I have 4an on both sides of my bottle line. LOL!
Just trying to get all my sh*t correct! Thanks Dave for the help!
I dont know if you are saying that TNT F-1 kits coome with bottle lines with 4an on the n20 noid side and 6an on the bottle nut side or what but I have 4an on both sides of my bottle line. LOL!
Just trying to get all my sh*t correct! Thanks Dave for the help! 
09-29-2004, 10:36 AM
#37
TECH Fanatic
iTrader: (1)
Join Date: May 2004
Location: Louisiana
Posts: 1,585
Likes: 0
Received 0 Likes
on
0 Posts
Off topic sorry! On my deal although I have the F-1 kit(bought used) my bottle line has 4an on both sides unlike it would with a new F-1 kit where it would have 4an on one side and 6an on the bottle side for some reason. So thanks for the help anyways! Yeah I think if they did another $99 sale they would sell a whole lot more because of the feedback on the quality of their product. Dynotune is run like a buisness should be. Honest,fair,and qaulity products! Good luck on another sale guys!
