Nitrous Plates I started making
Thread Starter
Joined: Nov 2001
Posts: 1,934
Likes: 0
From: The Woodlands, TX
Nitrous Plates I started making I know these aren't for LS1's but I do have a few ideas for LS1's that I have in the works.
I have FINALLY finished my first batch of nitrous plates for Lightnings and Cobras. The lightning plate has one large opening with 3 nozzles built into it while the Cobra plate has a twin bore design with a nozzle built into each opening. Keep in Mind If a lightning owner wants a twin bore plate he can use one as well as a Cobra owner using a single bore plate (as long as they have a single blade TB)
Here are a few of a Cobra plate that we are almost done polishing:
And here are a few more Cobra Plates in Blue:
Here are a few of the Prototype Lightning plate:
The following picture shows how cold the ENTIRE intake got after 3 short sprays of about 3 seconds each.
The plate has been flow tested as well and everything seems fine.
I have FINALLY finished my first batch of nitrous plates for Lightnings and Cobras. The lightning plate has one large opening with 3 nozzles built into it while the Cobra plate has a twin bore design with a nozzle built into each opening. Keep in Mind If a lightning owner wants a twin bore plate he can use one as well as a Cobra owner using a single bore plate (as long as they have a single blade TB)
Here are a few of a Cobra plate that we are almost done polishing:
And here are a few more Cobra Plates in Blue:
Here are a few of the Prototype Lightning plate:
The following picture shows how cold the ENTIRE intake got after 3 short sprays of about 3 seconds each.
The plate has been flow tested as well and everything seems fine.
Last edited by Bad Habit Bird; Sep 1, 2004 at 10:30 AM.
When you start working on a F-body design one hit me up.. Maybe we can work on a 90mm LSx idea. Im looking for 8s this year.. and if this could power my 2nd stage figure it would be good advertising for ya 
So what is the price for a 4 valve cobra plate and how well does it mix the fuel and n20 comeing out of the plate or does it mis in side just wondering. Like a tnt jet sprays them both in to each other.
Thread Starter
Joined: Nov 2001
Posts: 1,934
Likes: 0
From: The Woodlands, TX
Originally Posted by Mr Powell
When you start working on a F-body design one hit me up.. Maybe we can work on a 90mm LSx idea. Im looking for 8s this year.. and if this could power my 2nd stage figure it would be good advertising for ya
Originally Posted by White98Z
So what is the price for a 4 valve cobra plate and how well does it mix the fuel and n20 comeing out of the plate or does it mis in side just wondering. Like a tnt jet sprays them both in to each other.
Last edited by Bad Habit Bird; Sep 1, 2004 at 10:31 AM.
Trending Topics
I'm definately interested in this. Do you have any test mules yet for 03 Cobras??
If not, I am looking into buying a system and this looks like a great plate to buy. Let me know how much you want on here or through PM...... I have paypal so as soon as you are ready to release it I will buy one if the price is reasonable.
If not, I am looking into buying a system and this looks like a great plate to buy. Let me know how much you want on here or through PM...... I have paypal so as soon as you are ready to release it I will buy one if the price is reasonable.
Last edited by ITSTOCK; Mar 18, 2021 at 08:38 PM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by Mr Powell
When you start working on a F-body design one hit me up.. Maybe we can work on a 90mm LSx idea. Im looking for 8s this year.. and if this could power my 2nd stage figure it would be good advertising for ya
Thread Starter
Joined: Nov 2001
Posts: 1,934
Likes: 0
From: The Woodlands, TX
Can't seem to find anyone willing to test the plate for me to figure out exact jet patterns. I know the plate works but I don't want to sell it without jet patterns and jets to go with it.
Originally Posted by Bad Habit Bird
Can't seem to find anyone willing to test the plate for me to figure out exact jet patterns. I know the plate works but I don't want to sell it without jet patterns and jets to go with it.
I would be more than willing to test it out, I have an entire dry kit already, all I would need is the plate/fuel solenoid. Let me know!! Also, I would be more than willing to campaign this piece on all of the ford sites, just PM me or email me at chalupa28@comcast.net and let me know! Christ, I'm sure that one you have is just sitting there in the shop now, might as well have someone test it out for you! ME ME ME!!!! Also, I'd be willing to advertise on my car, with a little window sticker or whatever!!! I have the wideband and I would be more than willing to figure out what jet patterns/combinations, also willing to change out pulley sizes/configurations, just let me know what you are shooting for.Steve
Last edited by 5.8litrels1eater; Sep 25, 2004 at 02:56 PM.