Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

nitrous on camed ls1.

Old Sep 13, 2004 | 07:38 AM
  #1  
Trans Am Cam's Avatar
Thread Starter
Staging Lane
 
Joined: Aug 2004
Posts: 68
Likes: 0
Default nitrous on camed ls1.

installing ym nitrous on my ls1 with 71,000 miles on the odo.

Car has a Cam mti T1 cam, pretty mild cam.

gonna do around a 50-75 shot, should i be ok with that cam, and regular nX jettings?

car is allready makeing 365rwhp without the giggle juice. i figure a nice 50 shot will place me some place near or over 400rwhp. wich is all i want out of the car.
Reply
Old Sep 13, 2004 | 09:38 AM
  #2  
Nitro Dave's Nitrous Outlet's Avatar
FormerVendor
iTrader: (25)
 
Joined: Jun 2002
Posts: 12,283
Likes: 4
From: Waco, TX
Default

You will be fine.However you say a 50 shot now but the second you spray that you will be putting bigger jets in it.LOL
Dave
Reply
Old Sep 13, 2004 | 09:48 AM
  #3  
SDB's Avatar
SDB
10 Second Club
iTrader: (7)
 
Joined: Mar 2003
Posts: 2,327
Likes: 2
Default

If you don't go at least with a 150 shot, then something is very very wrong with you. Very, very ,very wrong. I mean it...you wil have to go to counseling and get medication.

I just put in a 200 shot last week and went through a 10 lb bottle in 2 days. Sport bikes absolutely hate me now.
Reply
Old Sep 13, 2004 | 09:56 AM
  #4  
shaneSS's Avatar
TECH Apprentice
iTrader: (2)
 
Joined: Mar 2004
Posts: 317
Likes: 0
Default

Yeah, I am debating a 75 wet shot on top of my F13 but I dont what to go higher because of my poor stock pistions/rods Also with anything over a 75 wet wouldnt we have to change injectors and fuel pump?
Reply
Old Sep 13, 2004 | 10:28 AM
  #5  
Trans Am Cam's Avatar
Thread Starter
Staging Lane
 
Joined: Aug 2004
Posts: 68
Likes: 0
Default

i know how the nitrous thing work starting low and wanting more..i had the juice on my stang started with a 35 a week later i was spraying 100. ...again i just wanna start slow.
Reply
Old Sep 13, 2004 | 11:37 AM
  #6  
SDB's Avatar
SDB
10 Second Club
iTrader: (7)
 
Joined: Mar 2003
Posts: 2,327
Likes: 2
Default

Originally Posted by shaneSS
Yeah, I am debating a 75 wet shot on top of my F13 but I dont what to go higher because of my poor stock pistions/rods Also with anything over a 75 wet wouldnt we have to change injectors and fuel pump?
Run the 150 shot, fine on stock motor...NO NEED TO UPGRADE FUEL INJECTORS ON A WET SYSTEM!!!! I would definately put in a Walboro fuel pump and hotwire kit...cheap insurance.
Reply
Old Sep 13, 2004 | 12:11 PM
  #7  
Zach@Texas-Speed's Avatar
FormerVendor
iTrader: (7)
 
Joined: Apr 2003
Posts: 1,106
Likes: 0
From: Lubbock
Default

ive got almost 100k on the clock, cam etc....and i spray 100-120, i think she likes it
Reply
Old Sep 13, 2004 | 02:13 PM
  #8  
shaneSS's Avatar
TECH Apprentice
iTrader: (2)
 
Joined: Mar 2004
Posts: 317
Likes: 0
Default

LOL, you guys are nutz. Spraying a motor with 100k plus. I wish I had such ballas grandes!!!!!!
Reply
Old Sep 13, 2004 | 02:14 PM
  #9  
shaneSS's Avatar
TECH Apprentice
iTrader: (2)
 
Joined: Mar 2004
Posts: 317
Likes: 0
Default

I need to get the juice just so My sig can say gassed/slammed/cammed. GOod one bowtie4life! I like that
Reply
Old Sep 15, 2004 | 04:16 PM
  #10  
slow trap's Avatar
TECH Addict
iTrader: (22)
 
Joined: Sep 2004
Posts: 2,639
Likes: 0
From: tennessee
Default

the stock fuel pump in my 02 ws6 is making 513 rwhp at 12.0 afr and has 27xxx miles on it.without a cam on a 150 shot the stock pump should last a long time.i do have a racetronix pump for when i put heads on my setup though.i thought about putting in the pump allready but would have to get retuned .a fpss might be a good idea though,just incase our pumps start getting weak.
Reply
Old Sep 15, 2004 | 04:22 PM
  #11  
Zach@Texas-Speed's Avatar
FormerVendor
iTrader: (7)
 
Joined: Apr 2003
Posts: 1,106
Likes: 0
From: Lubbock
Default

thanks shaneSS for the compliment...i wish i could put more under my sig, but i'd have to live in my car
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:14 AM.