Pushed out a head gasket today
10-17-2004, 07:13 PM
#1
Teching In
Thread Starter
Join Date: Mar 2004
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Pushed out a head gasket today I got a bit overzealous with the nitrous today and the nitrous gods ate some electrodes and pushed out a head gasket.
There's a bit of anti freeze that found it's way into the number #2 cylinder, confirmed by a wet plug and pulling the intake (green puddles on the intake valve).
How much of a "panic mode" should I be in to get it apart and cleaned up.
There's a bit of anti freeze that found it's way into the number #2 cylinder, confirmed by a wet plug and pulling the intake (green puddles on the intake valve).
How much of a "panic mode" should I be in to get it apart and cleaned up.
10-20-2004, 11:24 PM
#4
TECH Enthusiast
Join Date: Jun 2004
Location: Itasca, IL
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
Well my friend with a 94 LT1 blew a head gasket and it ended up costing about $15,000....he did get it stroked to a 383 and made the block virtually bullitproof but sometimes a blown head gasket will do that to ya... 
-but yea take the head off, get the coolant out of there get a new head gasket and get your car running again
-but yea take the head off, get the coolant out of there get a new head gasket and get your car running again
