5177 wiring ?? (Pic)
Thread Starter
TECH Addict
iTrader: (13)
Joined: Jan 2004
Posts: 2,900
Likes: 1
From: USN, Haze Grey and Underway
5177 wiring ?? (Pic) Alright..
I installed my kit today.. I haven't had a chance to test yet because I couldn't get the bottle filled..
My question is about the FPSS.. the pic shows that the FPSS connection seems to be jumpered.
I ran one line in from the MSD window switch, and the other to the relay. One line in and one line out. The pic is a bit confusing. Is it one in and one out with the ground from the solenoids connected to one side.
or should the two post be jumpered together.. Help me out before I attempt to spray..
Thanks
I installed my kit today.. I haven't had a chance to test yet because I couldn't get the bottle filled..
My question is about the FPSS.. the pic shows that the FPSS connection seems to be jumpered.
I ran one line in from the MSD window switch, and the other to the relay. One line in and one line out. The pic is a bit confusing. Is it one in and one out with the ground from the solenoids connected to one side.
or should the two post be jumpered together.. Help me out before I attempt to spray..
Thanks
I connected the 2 grounds for the solenoids to one side of the fpss and the other side goes straight to ground. That picture doesn't show it right. It looks like they might be saying to put the fpss inline with the yellow wire of the window switch. Either way works. Good luck.
Here's the right way.
Here's the right way.
Last edited by 01Sidewinder; Nov 15, 2004 at 10:59 AM.
