Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

tr224/227

Thread Tools
 
Search this Thread
 
Old Dec 14, 2004 | 12:26 PM
  #1  
firegod's Avatar
Thread Starter
Teching In
 
Joined: Nov 2004
Posts: 5
Likes: 0
From: Williamson County, Tx
Question tr224/227

I searched and have found nothing about the Thunder Racing 224/227 .563 .569 114lsa cam. I had pretty much made up my mind to use the TR224 114lsa when i stumbled on this one and was wondering how much difference there was between the two camshafts for driving both on and off the spray. While I know the 224/224 114lsa cam is a good all around cam. while the 224/227 is has the extra exhaust duration for nitrous/forced induction, will it hurt performance N/A as a daily driver when not using the tnt kit?

thanks,
matt
Reply
Old Dec 14, 2004 | 01:03 PM
  #2  
PREDATOR-Z's Avatar
TECH Senior Member
 
Joined: Mar 2004
Posts: 14,620
Likes: 17
From: BFE
Default

Nope not hurting N/a especially if you are cam only
Reply
Old Dec 14, 2004 | 01:22 PM
  #3  
Debian Dog's Avatar
TECH Apprentice
 
Joined: Jun 2002
Posts: 372
Likes: 0
From: Chester, VA
Default

Originally Posted by firegod
I searched and have found nothing about the Thunder Racing 224/227 .563 .569 114lsa cam. I had pretty much made up my mind to use the TR224 114lsa when i stumbled on this one and was wondering how much difference there was between the two camshafts for driving both on and off the spray. While I know the 224/224 114lsa cam is a good all around cam. while the 224/227 is has the extra exhaust duration for nitrous/forced induction, will it hurt performance N/A as a daily driver when not using the tnt kit?
I have a 224/228 and I am sure I do not make as much power as say a 224/224 but I do not get the KR and other issues I used to have. And... I actually backed the nitrous shot down by 35 and still ran a 1/10 faster than before the cam.

They say if your going to ever shoot around a 100 shot, then do not worry about the cam. I am hoping to shoot a 200 one day so...
Reply
Old Dec 14, 2004 | 01:24 PM
  #4  
Debian Dog's Avatar
TECH Apprentice
 
Joined: Jun 2002
Posts: 372
Likes: 0
From: Chester, VA
Default

Oh and you can listen to it here.

Cutout closed and open
Reply




All times are GMT -5. The time now is 06:24 PM.