200 shot with NX kit?
#3
12 Second Truck Club
iTrader: (1)
Join Date: Jun 2004
Location: The Chicken Ranch, California
Posts: 1,395
Likes: 0
Received 0 Likes
on
0 Posts
Robbie the Robot jet calculator (pretty accurate from what I hear) says 199hp to the wheels is 72n/39f with 1000psi n2o pressure and 55psi fuel pressure. And 78n/42f is 233hp to the wheels. If you fuel pressure is higher than 55, these will be slightly rich jet configurations.
Not trying to step on Dave's toes or anything. (this is why I wish we had a good jet chart from NX, other than that one in the other post that only goes to 150hp.)
Edit: a single shark nozzle is allegedly good for up to 250hp.
Not trying to step on Dave's toes or anything. (this is why I wish we had a good jet chart from NX, other than that one in the other post that only goes to 150hp.)
Edit: a single shark nozzle is allegedly good for up to 250hp.
#5
FormerVendor
iTrader: (25)
Originally Posted by Magic Chicken
Robbie the Robot jet calculator (pretty accurate from what I hear) says 199hp to the wheels is 72n/39f with 1000psi n2o pressure and 55psi fuel pressure. And 78n/42f is 233hp to the wheels. If you fuel pressure is higher than 55, these will be slightly rich jet configurations.
Not trying to step on Dave's toes or anything. (this is why I wish we had a good jet chart from NX, other than that one in the other post that only goes to 150hp.)
Edit: a single shark nozzle is allegedly good for up to 250hp.
Not trying to step on Dave's toes or anything. (this is why I wish we had a good jet chart from NX, other than that one in the other post that only goes to 150hp.)
Edit: a single shark nozzle is allegedly good for up to 250hp.
I have a list of NXs flowed jet pattern hanging here in my office.There jetting list is what they flowed for there equipment.Ill put together a post for you with NXs jetting.
Dave