DynoTune Fully Automatic Nitrous Bottle Warmer Kit – $99!!!!
08-08-2004, 08:24 PM
#1
LS1TECH Sponsor
Thread Starter
iTrader: (13)
Join Date: Jul 2004
Location: Massachusetts
Posts: 1,766
Likes: 0
Received 0 Likes
on
0 Posts
DynoTune Fully Automatic Nitrous Bottle Warmer Kit – $99!!!! We are offering our complete Fully Automatic Nitrous Bottle Warmer kit for one week only at $99.
This Bottle warmer is one of the best available and uses the smallest most accurate pressure switch available. The Dynotune pressure switch is fully adjustable and holds the pressure within 50 PSI. It comes with all the components to install and is made out of superior components like stainless steel not aluminum.
This special ends next Sunday, 8/15. Just go to our website and place your order!
http://www.speedshop.org/store/scrip...p?idproduct=17
Thanks,
Dean
This Bottle warmer is one of the best available and uses the smallest most accurate pressure switch available. The Dynotune pressure switch is fully adjustable and holds the pressure within 50 PSI. It comes with all the components to install and is made out of superior components like stainless steel not aluminum.
This special ends next Sunday, 8/15. Just go to our website and place your order!
http://www.speedshop.org/store/scrip...p?idproduct=17
Thanks,
Dean
Trending Topics
08-11-2004, 11:10 AM
#9
I am all ready to order a heater and purge but what is the deal with the adapter for the heater? I have a TNT F2 kit and want to make sure I am getting everything that I need to hook this heater and purge up? Or do I need to buy other adapters and such? Thanks
Cajun
Cajun
08-12-2004, 05:27 AM
#11
LS1TECH Sponsor
Thread Starter
iTrader: (13)
Join Date: Jul 2004
Location: Massachusetts
Posts: 1,766
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TigerFan187
I have the TNT F-1 kit and I dont know what fitting I need for the warmer
6an or 4an????????????? Please help me!!!!!!!!!!!
6an or 4an????????????? Please help me!!!!!!!!!!!
If your main feedline is the diameter of a pencil then you need the 4AN kit, if its larger like a sharpe marker than you need the 6AN line. 99% of all kits use the 4AN fitting!
CHeers
Dan
08-12-2004, 09:28 PM
#12
LS1TECH Sponsor
Thread Starter
iTrader: (13)
Join Date: Jul 2004
Location: Massachusetts
Posts: 1,766
Likes: 0
Received 0 Likes
on
0 Posts
JuiSSed, We have sold quite a few, I would rather not advertise the exact quantity, I am sure you can understand why. I guess the word is spreading as a lot of non F-Bodies guys are jumping on the bandwagon also.
Everyone who has ordered to date, including the many performance shops - we appreciate your orders!
Nitro Dave,
No problem jumping on my thread - feel free anytime you like. Also, thanks for the complement it is very much appreciated. If we can ever help you out please feel free to email us anytime.
Dean
Everyone who has ordered to date, including the many performance shops - we appreciate your orders!
Nitro Dave,
No problem jumping on my thread - feel free anytime you like. Also, thanks for the complement it is very much appreciated. If we can ever help you out please feel free to email us anytime.
Dean
08-13-2004, 09:16 PM
#13
TECH Apprentice
I got my heater today.. took like THREE days to get it.. best shipping ever.
They include everything in this kit. Wire, connectors, fuse, EVERYTHING.
This is a hell of deal.
They include everything in this kit. Wire, connectors, fuse, EVERYTHING.
This is a hell of deal.
08-13-2004, 10:05 PM
#14
Originally Posted by TigerFan187
I have the TNT F-1 kit and I dont know what fitting I need for the warmer
6an or 4an????????????? Please help me!!!!!!!!!!!
6an or 4an????????????? Please help me!!!!!!!!!!!
Cajun
08-14-2004, 11:03 PM
#17
Originally Posted by DynotuneN2O
We are offering our complete Fully Automatic Nitrous Bottle Warmer kit for one week only at $99.
This Bottle warmer is one of the best available and uses the smallest most accurate pressure switch available. The Dynotune pressure switch is fully adjustable and holds the pressure within 50 PSI. It comes with all the components to install and is made out of superior components like stainless steel not aluminum.
This special ends next Sunday, 8/15. Just go to our website and place your order!
http://www.speedshop.org/store/scrip...p?idproduct=17
Thanks,
Dean
This Bottle warmer is one of the best available and uses the smallest most accurate pressure switch available. The Dynotune pressure switch is fully adjustable and holds the pressure within 50 PSI. It comes with all the components to install and is made out of superior components like stainless steel not aluminum.
This special ends next Sunday, 8/15. Just go to our website and place your order!
http://www.speedshop.org/store/scrip...p?idproduct=17
Thanks,
Dean
I just ordered the bottle heater and purge kit. I got the 4AN fitting and I hope that is the right fitting for my TNT F2 kit??????????????
08-15-2004, 09:35 PM
#18
LS1TECH Sponsor
Thread Starter
iTrader: (13)
Join Date: Jul 2004
Location: Massachusetts
Posts: 1,766
Likes: 0
Received 0 Likes
on
0 Posts
JuiSSed,
Thanks for the positive words, they are very much appreciated! I am sure you are or will be enjoying the kit very soon.
Cajun,
Sorry for the delay in the response but we were out of the office for the weekend. The -4 should be the one for your kit. If it turns out you need the -6 just let us know and it will be on its way to you.
Installation is not bad at all and our installation instructions are very detailed. If you have an issue we will be more than willing to help you out.
Thanks again guys,
Dean
Thanks for the positive words, they are very much appreciated! I am sure you are or will be enjoying the kit very soon.
Cajun,
Sorry for the delay in the response but we were out of the office for the weekend. The -4 should be the one for your kit. If it turns out you need the -6 just let us know and it will be on its way to you.
Installation is not bad at all and our installation instructions are very detailed. If you have an issue we will be more than willing to help you out.
Thanks again guys,
Dean
08-16-2004, 05:52 AM
#19
Originally Posted by DynotuneN2O
JuiSSed,
Thanks for the positive words, they are very much appreciated! I am sure you are or will be enjoying the kit very soon.
Cajun,
Sorry for the delay in the response but we were out of the office for the weekend. The -4 should be the one for your kit. If it turns out you need the -6 just let us know and it will be on its way to you.
Installation is not bad at all and our installation instructions are very detailed. If you have an issue we will be more than willing to help you out.
Thanks again guys,
Dean
Thanks for the positive words, they are very much appreciated! I am sure you are or will be enjoying the kit very soon.
Cajun,
Sorry for the delay in the response but we were out of the office for the weekend. The -4 should be the one for your kit. If it turns out you need the -6 just let us know and it will be on its way to you.
Installation is not bad at all and our installation instructions are very detailed. If you have an issue we will be more than willing to help you out.
Thanks again guys,
Dean
Cajun
