nitrous videos
01-07-2005, 01:34 PM
#4
Teching In
Thread Starter
Join Date: Jan 2005
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
thanks jeff and tanner. tanner 473rwhp and 10.90s dang, do you have alot of weight reduction or what? that site you showed me has tons of f body videos, thanks thats what i have been looking for.
on a side note for some reason my computer won't right click save as. it just happend recently, it worked like 6 months ago. does anyone know what my problem is, or do they know of another forum that could anwser my question. thanks guys.
on a side note for some reason my computer won't right click save as. it just happend recently, it worked like 6 months ago. does anyone know what my problem is, or do they know of another forum that could anwser my question. thanks guys.
01-07-2005, 06:20 PM
#6
TECH Enthusiast
iTrader: (8)
Join Date: Dec 2001
Location: SE Florida
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Here is one of mine on the spray. Not all that impressive seeing I've run 12.3 N/A and this run was on a 100 shot. But the 12.3 was with half way decent tuning with a maft, and the nitrous was done with stock tuning with the same mods. Was running high 12's that day n/a, so it should all work out once it's properly tuned.
http://www.s92575704.onlinehome.us/ss/videos/11.98.mpg
http://www.s92575704.onlinehome.us/ss/videos/11.98.mpg
01-07-2005, 11:50 PM
#7
8 Second 6 Speed Director
iTrader: (6)
Join Date: May 2002
Location: windsor, ont. canada - Home of the fastest LT1 6spd.
Posts: 3,293
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by stretch104
thanks jeff and tanner. tanner 473rwhp and 10.90s dang, do you have alot of weight reduction or what? that site you showed me has tons of f body videos, thanks thats what i have been looking for.
on a side note for some reason my computer won't right click save as. it just happend recently, it worked like 6 months ago. does anyone know what my problem is, or do they know of another forum that could anwser my question. thanks guys.
on a side note for some reason my computer won't right click save as. it just happend recently, it worked like 6 months ago. does anyone know what my problem is, or do they know of another forum that could anwser my question. thanks guys.
and thanks!
Trending Topics
01-09-2005, 12:10 AM
#11
Teching In
Thread Starter
Join Date: Jan 2005
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
01-09-2005, 07:15 AM
#13
TECH Enthusiast
iTrader: (1)
Join Date: Feb 2004
Location: West Virginia
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
here's another, 4000# race weight! (vert+200#driver +tools in the trunk)
http://home.comcast.net/~chalupa28/ws6atco.WMV
Moser 12 Bolt with 3.73's and eaton posi, Spohn adjustable tourque arm, slot car racing control arms and panhard bar, and the clutch is ram vds 910, all on 26x10.50x16 et streets. However, 26's were too small, and a change to 28's has been made.
http://home.comcast.net/~chalupa28/ws6atco.WMV
Moser 12 Bolt with 3.73's and eaton posi, Spohn adjustable tourque arm, slot car racing control arms and panhard bar, and the clutch is ram vds 910, all on 26x10.50x16 et streets. However, 26's were too small, and a change to 28's has been made.
Last edited by 5.8litrels1eater; 01-09-2005 at 07:23 AM.
01-09-2005, 10:41 PM
#14
9 Second Club
Join Date: Jul 2003
Posts: 1,195
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 5.8litrels1eater
here's another, 4000# race weight! (vert+200#driver +tools in the trunk)
http://home.comcast.net/~chalupa28/ws6atco.WMV
Moser 12 Bolt with 3.73's and eaton posi, Spohn adjustable tourque arm, slot car racing control arms and panhard bar, and the clutch is ram vds 910, all on 26x10.50x16 et streets. However, 26's were too small, and a change to 28's has been made.
http://home.comcast.net/~chalupa28/ws6atco.WMV
Moser 12 Bolt with 3.73's and eaton posi, Spohn adjustable tourque arm, slot car racing control arms and panhard bar, and the clutch is ram vds 910, all on 26x10.50x16 et streets. However, 26's were too small, and a change to 28's has been made.
I ran 410 gears with a 26/10.5/16 ET Street and went 1.44 60ft.
01-09-2005, 11:09 PM
#16
Launching!
iTrader: (3)
Join Date: Dec 2001
Location: Horsham PA
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GueSS Who
It needs alot more gear. Probably like 430s
I ran 410 gears with a 26/10.5/16 ET Street and went 1.44 60ft.
I ran 410 gears with a 26/10.5/16 ET Street and went 1.44 60ft.
01-13-2005, 08:50 AM
#18
Launching!
iTrader: (22)
Join Date: Aug 2002
Location: LR, AR
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by D Rock
HOLY CRAP. Both of you guys cars leave the line so nice. JeffT, what all is done to your car?
01-13-2005, 04:09 PM
#20
Launching!
iTrader: (22)
Join Date: Aug 2002
Location: LR, AR
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
it was pilled for 250 but only picking up around 210.
another video
that 6.58 is 1/8 mile and the car was real rich at that time. It's gone a little quicker since.
another video
that 6.58 is 1/8 mile and the car was real rich at that time. It's gone a little quicker since.
Last edited by JeffT; 01-13-2005 at 04:26 PM.