150 tnt shot an 5.3
01-20-2005, 07:50 PM
#1
TECH Apprentice
Thread Starter
Join Date: Jan 2004
Location: Kansas City, Mo
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
150 tnt shot an 5.3 i am putting a tnt power ring on my motor i am almost done with and i was wondering if my stock fuel pump and injectors will be enough to push a 150 wet shot?
01-20-2005, 08:14 PM
#2
TECH Resident
iTrader: (1)
Join Date: Dec 2001
Location: ArKanSas, LR
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
Injectors will be fine with a wet shot. They are not a factor. But the fuel pump will take a hit. You could do it yes. But I would not say it's 100% safe by any means. odds are you will be OK. But the motor wont handle a lean condition to good to many times if it fails.
I look at it this way. You are going forced induction. And the fuel system just wasnt ment for it. But the good thing is a fuel pump is all you will need. No need for injectors and such like you would with other types of FI.
I look at it this way. You are going forced induction. And the fuel system just wasnt ment for it. But the good thing is a fuel pump is all you will need. No need for injectors and such like you would with other types of FI.
