Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

How much HP will this fuel system support??

Thread Tools
 
Search this Thread
 
Old 02-22-2005 | 07:06 AM
  #1  
necrocannibal's Avatar
Thread Starter
10 Second Club
iTrader: (5)
 
Joined: Jan 2003
Posts: 1,500
Likes: 13
From: Memphis,TN
Default How much HP will this fuel system support??

Its an enrichment system with a Holley BLue pump and an NX Fuel solenoid. How much fuel can that flow and wheres my limit on shot size?? Is 250 too big for it?
Old 02-22-2005 | 12:09 PM
  #2  
Orange Crush 408's Avatar
On The Tree
iTrader: (-2)
 
Joined: Oct 2004
Posts: 191
Likes: 0
From: amarillo,tx
Default

Have you tuned it? Those numbers look low. I think you should be fine on a 250 shot.
Old 02-22-2005 | 12:17 PM
  #3  
necrocannibal's Avatar
Thread Starter
10 Second Club
iTrader: (5)
 
Joined: Jan 2003
Posts: 1,500
Likes: 13
From: Memphis,TN
Default

Originally Posted by Orange Crush 408
Have you tuned it? Those numbers look low. I think you should be fine on a 250 shot.


Havent put up the new numbers yet 484 rwhp 497 rwtq on motor and 617 rwhp 766 rwtq.
Old 02-22-2005 | 06:32 PM
  #4  
B18B1LS1's Avatar
TECH Fanatic
iTrader: (12)
 
Joined: Nov 2001
Posts: 1,711
Likes: 6
From: Lawrenceville, Ga
Default

A 250 shot is about the limit of the Holley Blue. Beyond that is pushing it too close IMO.
Old 02-23-2005 | 07:14 AM
  #5  
Z284U2TRY's Avatar
TECH Resident
iTrader: (5)
 
Joined: Nov 2001
Posts: 885
Likes: 0
From: around
Default

So for 300 shot what pump will support this?
Old 02-23-2005 | 08:53 AM
  #6  
PHANTA-Z's Avatar
Launching!
 
Joined: Jan 2002
Posts: 262
Likes: 0
From: Charlotte, NC
Default

300 shot on a motor that is already making damn near 500 rhwp, your gonna need some very serious injectors (55-60 #) and likely a dual-pump intank setup w/ either a hotwire kit or a boost-a-pump. Thats a rough guess, but its pretty close.
Old 02-23-2005 | 09:32 PM
  #7  
Josh@PremierAutosports's Avatar
Banned
iTrader: (11)
 
Joined: Aug 2004
Posts: 541
Likes: 0
From: Memphis
Default

Originally Posted by PHANTA-Z
300 shot on a motor that is already making damn near 500 rhwp, your gonna need some very serious injectors (55-60 #) and likely a dual-pump intank setup w/ either a hotwire kit or a boost-a-pump. Thats a rough guess, but its pretty close.

He is running a wet kit so injector size won't matter as long as he has enough injector for motor. Can the blue pump only support 250hp? Whats the next size up?

Last edited by b18c1hybrid; 02-24-2005 at 10:09 PM.
Old 02-24-2005 | 07:05 PM
  #8  
Orange Crush 408's Avatar
On The Tree
iTrader: (-2)
 
Joined: Oct 2004
Posts: 191
Likes: 0
From: amarillo,tx
Default

sweet!
Old 02-24-2005 | 08:48 PM
  #9  
B18B1LS1's Avatar
TECH Fanatic
iTrader: (12)
 
Joined: Nov 2001
Posts: 1,711
Likes: 6
From: Lawrenceville, Ga
Default

There are lots of other pumps out. Holley did make a black, I think it was rated 140 gph if I remember right. They also have the VOLUMAX series, those go up to around 250 gph. Then of course you have all the other brands as well, Aeromotive, BG, Magnaflow, etc.....




All times are GMT -5. The time now is 06:24 PM.