Best NOS Install Shop
Thread Starter
11 & 7 Second Clubs
Joined: Oct 2004
Posts: 1,299
Likes: 0
From: Motorhome, Freeways, Truckstops, Pits
Best NOS Install Shop We are considering adding a 200-400 hp direct port NOS system on our 622 BBC and are trying to find "the best shop" to help us with the install, preferably within a days drive from Denver. I have emailed Cold Fusion and asked them the same question. Suggestions?
On The Tree
Joined: Jul 2004
Posts: 106
Likes: 0
From: Houston, TX
nitrous plumbing I do not know of anyone shops close to you. However, We have a 3 day turn around time on intakes. i have attached some pics. We have the best plumbing department hands down. Hans Feustel Racing - Engines, Reher Morrison and many other builders use our product and service. Take a look...713-849-4120
WWW.COLDFUSIONNITROUS.COM
713-849-4120
WWW.COLDFUSIONNITROUS.COM
713-849-4120
Thread Starter
11 & 7 Second Clubs
Joined: Oct 2004
Posts: 1,299
Likes: 0
From: Motorhome, Freeways, Truckstops, Pits
Originally Posted by wholesalenitrousmike
I do not know of anyone shops close to you. However, We have a 3 day turn around time on intakes. i have attached some pics. We have the best plumbing department hands down. Hans Feustel Racing - Engines, Reher Morrison and many other builders use our product and service. Take a look...713-849-4120
WWW.COLDFUSIONNITROUS.COM
713-849-4120
WWW.COLDFUSIONNITROUS.COM
713-849-4120
If you would click the Firebird in my sig and then the Firebird at our site you will soon find pics of our engine and manifold.
Thread Starter
11 & 7 Second Clubs
Joined: Oct 2004
Posts: 1,299
Likes: 0
From: Motorhome, Freeways, Truckstops, Pits
Originally Posted by gator's 99TA
it isnt close at all but Pat Musi is a damn genious with the mountain motor direct port systems.
Trending Topics
Originally Posted by bickelfirebird
Mike, Reher recommended Cold Fusion to me last year because of your angled nozzles, but I did not realize you also did the manifold plumbing yourself. Would you also need the hood scoop?
If you would click the Firebird in my sig and then the Firebird at our site you will soon find pics of our engine and manifold.
If you would click the Firebird in my sig and then the Firebird at our site you will soon find pics of our engine and manifold.
Talking to Reher/Morrison makes me think a little bit about your setup, did Darrin Morgan do your Cylinder Heads?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
11 & 7 Second Clubs
Joined: Oct 2004
Posts: 1,299
Likes: 0
From: Motorhome, Freeways, Truckstops, Pits
=MUSTANGEATERdid Darrin Morgan do your Cylinder Heads?
I know of some local guys here, they have some really fast imports with 50 shots they run like 17's at the track and drive real real fast on the street....I would think they could hook you up!!!! They are all geniuses when it comes to stickers too, that always seems to help out...
Go with Pat Musi, he seems to have been doing 600+ cube direct port 400+hp kits for a while now...
SDB
Go with Pat Musi, he seems to have been doing 600+ cube direct port 400+hp kits for a while now...
SDB
Originally Posted by bickelfirebird
Hmm, you know, I didn't ask. Is he their pro stock engine builder, because his name sounds familiar? They are RM 12 degree Raptor, all titanium stuff, intake flows around 600 cfm. They have since been worked a bit and improved by Brad Klein at dream chaser.
Floyd.
Originally Posted by MUSTANGEATER
I would just go with what Reher said, you won't find anyone better than what he suggests. Well at least on this site.
Talking to Reher/Morrison makes me think a little bit about your setup, did Darrin Morgan do your Cylinder Heads?
Talking to Reher/Morrison makes me think a little bit about your setup, did Darrin Morgan do your Cylinder Heads?
Mike
