After weeks of reading and learning through the forums, I finally ended up running:
NX wet kit, genx2 upgrades, NX switch panel, ngk tr6 plugs gapped at 35, BMN nitro controller, all rolling on Nitto drag radials. I will be spraying 150 and hoping for high 11's. I don't want to spray on first to try and conserve the stock 10 bolt. Think it can be done? If not I will just turn that little switch that says off on the controller.

I have it installed but am waiting for a bottle fill tomarrow morning. I can't wait to see how it runs. Guessing about 450hp to the wheels?

I hope this setup is enough for me, but if it is not, my next steps are intank 255 fuel pump, 12 bolt rear (as soon as 10 breaks) heads and cams (any suggestions on a good package for nitrous?)

I would like to thank all the members on the forums who helped me out with my questions. Special thanks to Nitro Dave for his advice and excellent deals.

Wish me luck, going to the track on wednesday.

 

Good Luck

Make sure to start low, and work your way up. Get a feel for how hard it hits

 

Thanks v-10 killer, I will try to post some pics of my set up soon.