, Im gonna power it from the 12v wire to my wot switch so it gets power when I activate the kit and ground it to the relay 
window switch question
Thread Starter
Launching!
Joined: Mar 2005
Posts: 219
Likes: 0
From: Las Vegas
window switch question I have a dynotune nitrous kit, and I was wondering on how to install a harlen window switch into my nitrous kit? I understand the red wire goes to 12v, green is for the tach, black is ground but what is the white wire for and how does the window switch wire into my nitrous kit?
*Please help i know how important a window switch is and I'm going to get my tune soon.
**is this a good rpm = 3500 to 5800 for the switch to work on a almost stock ls1
*Please help i know how important a window switch is and I'm going to get my tune soon.
**is this a good rpm = 3500 to 5800 for the switch to work on a almost stock ls1
Staging Lane
Joined: May 2003
Posts: 74
Likes: 0
From: north fl
Originally Posted by zrated
I have a dynotune nitrous kit, and I was wondering on how to install a harlen window switch into my nitrous kit? I understand the red wire goes to 12v, green is for the tach, black is ground but what is the white wire for and how does the window switch wire into my nitrous kit?
*Please help i know how important a window switch is and I'm going to get my tune soon.
**is this a good rpm = 3500 to 5800 for the switch to work on a almost stock ls1
*Please help i know how important a window switch is and I'm going to get my tune soon.
**is this a good rpm = 3500 to 5800 for the switch to work on a almost stock ls1
green is almost always ground.
red i think goes to the postive side of your arming switch
and the black goes to the negative side.
not postive dont quote me
Here is a link to a good site with some install guides. http://rocketworldracing.com/store/Instructions.php
The window switch they have instructions for is a NX window switch which is the same a MSD which might be the same as the Harlan
The window switch they have instructions for is a NX window switch which is the same a MSD which might be the same as the Harlan
I put the white wire on the ground side of my FPSS. You could run it there or to the ground on your relay...either way. Don't wire it to the solenoids though..it will fry the window switch.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
