Killing 03'Cobra's with NOS?
Hope it ends up like my avatar!(See mongoose pic whipping a Cobra) 
Ouch major hate on the cobras, they are good cars just not an ls1.
A stock 03 is cable of high 12's then if you put one with a pulley etc then I'd say low 12's high 11's with a capable driver.
Get the spray and you should be pretty neck and neck with a modded cobra.
And you don't need nitrous to be an 03/04 Cobra (if its stock). If its stock its only really running 3-5 tenths faster than fbodys. Crap on the street if you catch traction and he doesnt that could end up with you winning. Basically bolt ons should take care of all your stock 03/04 Cobra needs.
Trending Topics
It also helps if you know what to look for sometimes upper pullies are stock and lowers are not.
The Best V8 Stories One Small Block at Time
My mods are - Hooker LTs, ORY, Loudmouth, Lid, Ported TB, 100 shot.. Thats with a A4 with stock converter and 3.23s..
I dunno what this guy runs at the track but on a GTECH2 it ran a 12.21@121mph w/ 315/35 nitto DRs. Think i remember the 60ft being 2.02
Spanked several 03 Cobras. Some 03 Cobras are tired of getting spanked, so they're spraying also, so watch out.
Spanked several 03 Cobras. Some 03 Cobras are tired of getting spanked, so they're spraying also, so watch out.
It's kinda funny to know they are running 2 power adders vs. 1 in an LS1
I hate 'em too. I could've got one at TRUE factory invoice, but NO THANKS. I look on the bright side however, it motivated me to pick up an NX kit
A stock 03 is cable of high 12's then if you put one with a pulley etc then I'd say low 12's high 11's with a capable driver.
Get the spray and you should be pretty neck and neck with a modded cobra.


