Yes we have one ready to ship..
The 3 qt will outlast the 10lb bottle.Ill get ricky to figure up the math on the burn rate tommorrow.He is good at that.To give you an idea.Alot of guys use 2qt cells on there systems.
Dave

 

Robert,I can not tell by that pic.Do you have a better one for me.
Dave

 

One of these tanks would be sweet to use on a meth system for a F/I car. How much for just the tank?

 

These sytems are BADDD-ASSSS. Putting together stand alone systems have always been such a PITA, finding all the right parts, and hoping to find space for them all. Plus, when you piece them together, they never come out looking as good as these do.

Nice work Dave!

 

3 QT of fuel (C-16) will weigh just over 5lbs. 200 wet Shot will use 116 lbs. of fuel per hour. 116/60/60=.032lbs per second of use. So lets say your car is a 10second ride and you use the nitrous start to finish. One past you will use .320 lbs. So your tank has 5lbs in it you could make 15.625 passes. Now this would dry the tank and is not practical, but it shows just how much fuel is needed. I would only make 7-10 passes at the most. You should always check the tank before each run. Just to make sure you did not have leak somewhere and your tank is dry. Also a FPSS should be used. Hope this helps.
Ricky

 

I'll try to find better pic. In mean time, do have measurements. It looks like it will be to deep and hit air intake tube from screen area. But, may be able to mod and make work, angle cut the bottom and reweld?
Edit: found a couple pics, maybe you can tell.
Vararam Install
Vararm

 

wow, awesome setup!!! wish you guys would have had this 6 months ago before I peiced mine together!