Anyone run a Dry kit on a Z06???
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Anyone run a Dry kit on a Z06??? The NOS 5177 or what ever it is. i know its set up for the f-body, but do they have one for the zo6?
i think i want to put one on my old mans Z06 for emergency purposes!!!
the car went 12.2 @ 115-116 so with a 100-125 im sure 11.5- 11.7 would be no problem!!
i think i want to put one on my old mans Z06 for emergency purposes!!!
the car went 12.2 @ 115-116 so with a 100-125 im sure 11.5- 11.7 would be no problem!!
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
im leaning more towards a dry for the softer hit.
the car is bone stock, and id like to just get a little hit from it.
plus the dry is so easy to install. lol
NX doesnt do a drysetup do they?
the car is bone stock, and id like to just get a little hit from it.
plus the dry is so easy to install. lol
NX doesnt do a drysetup do they?
Not technicaly.
NX will probley never offer a dry kit.They do not care for dry set ups.However Nitrous Outlet does have dry kits built for us by Nitrous Express.
I got with Ricky and we came up with three top quality dry kits.The way I see it is that if someone wants to go dry whay should they have to suffer and run those tiny crappy NOS solenoids.
Dave
NX will probley never offer a dry kit.They do not care for dry set ups.However Nitrous Outlet does have dry kits built for us by Nitrous Express.
I got with Ricky and we came up with three top quality dry kits.The way I see it is that if someone wants to go dry whay should they have to suffer and run those tiny crappy NOS solenoids.
Dave
Hey, I run those tiny crappy NOS noids. Dave does offer the 5177 also, but is partial to NX. I am qiute happy with my 5177, actually 2 of them in dual stage. The redudant noids are for safety, as about the only thing that can go wrong is a noid sticking open. NX does make quality stuff, for sure. As always buy from a site vendor on what ever you chose to support our forum.
Dave does offer the 5177 also, but is partial to NX. I am qiute happy with my 5177, actually 2 of them in dual stage. The redudant noids are for safety, as about the only thing that can go wrong is a noid sticking open. NX does make quality stuff, for sure. As always buy from a site vendor on what ever you chose to support our forum. Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by Hennytime
well, once you get a nitrous filter, its almost impossible for a noid to stick open
Edit: ...and is wasn't the NOS powershot noid either, different brand.
Originally Posted by Noyzee
So Dave, this means you offer a dry kit?
if so what do you have??
im listening. lol
if so what do you have??
im listening. lol
Yes we carry three kinds that I prefer.
We have our Halo system for the F bodys.We can build one for the corvette also.
We have a single nozzle kit and a dual nozzle kit.
NX builds them for us with NX parts.
Dave
We have our Halo system for the F bodys.We can build one for the corvette also.
We have a single nozzle kit and a dual nozzle kit.
NX builds them for us with NX parts.
Dave
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
sweet, Now i need to talk to my old man and convince him into letting me do it. what he needs to relize is, im going to steel his car alot from him. lol
Teching In
Joined: Oct 2004
Posts: 9
Likes: 0
I just recieved my Dry kit from Dave I think on thursday. It looks like a nice kit. I love the fact that it uses NX products.
Dave, can the Halo nozzle work with a vararam intake?????? If so how much. Minus the kit I already have. Thanks, Kaley
Dave, can the Halo nozzle work with a vararam intake?????? If so how much. Minus the kit I already have. Thanks, Kaley