purge on the radiator?
#1
purge on the radiator?
Has anyone purged onto the radiator that would give it (the engine) a cooling affect i would imagine.. how did that affect your car? if its not good to purge on the radiator where else could you mount the the purge nozzels in the engine bay.. i wouldn't want to purge to show off that i have nitrous so some secret purge hints or tips would be cool.. i dont have an f-body (yet) but is definatly something im looking at as a next car
#2
TECH Apprentice
Join Date: Oct 2003
Location: Lumberton, TX
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
I had thought the same question. I'm sure it would work to some degree. I just put my purge in the old fashioned place in back of the hood.
I do notice that after I spray though, my engine coolant temp goes down about 10 degrees or so.
I do notice that after I spray though, my engine coolant temp goes down about 10 degrees or so.
#4
Originally Posted by MetallicaMatt
your trying to add air to a pressurized system...I'm not sure it would work
plus you'd create an air pocket which is bad
plus you'd create an air pocket which is bad
#5
i have thought about this as well, why waste it when it could serve a dual purpose. couldnt hurt anything but im not sure a single purge would be enough to make a difference
#6
Originally Posted by terry s
I thought he meant purging by spraying the radiator, not spraying in the radiator.
#7
TECH Regular
Join Date: Nov 2004
Location: Corvallis, Or
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
I remember reading about people purging it onto their oil pan and cooling off the oil a little, this was on some serious drag cars also, I don't think they were even running radiators. I say go for it its not gonna hurt anything, just make sure your fan is off or the nitrous is spraying with the fan not against it.
Trending Topics
#10
Originally Posted by white2001s10
Purge into the engine via the intake air duct.
#14
Originally Posted by white2001s10
Been purging into the engine like that since 1994.
#15
TECH Fanatic
iTrader: (4)
Join Date: May 2002
Location: Fairview Heights Illinois
Posts: 1,851
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 00Z-28-LT1
has it done anything for you, i could hide my purge real well if this works. i had thought of this before but did not do it because i thought it would just be an uncontroled dry shot. any cooling affect?
#16
Originally Posted by LS1shark
The effective way for spraying is in to the intercooler for turbo car.
if i was to go with nitrous on any car i would at least purge somewhere in the engine or the radiator as a cooling affect and not to show it off.. a dry kit purging isnt even nesecary(sp?) is it. its if you go with a wet set up youd want to purge?
#17
TECH Fanatic
iTrader: (4)
Join Date: May 2002
Location: Fairview Heights Illinois
Posts: 1,851
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2k3GTP
yea i figured spraying onto an intercooler would have sme nice results
if i was to go with nitrous on any car i would at least purge somewhere in the engine or the radiator as a cooling affect and not to show it off.. a dry kit purging isnt even nesecary(sp?) is it. its if you go with a wet set up youd want to purge?
if i was to go with nitrous on any car i would at least purge somewhere in the engine or the radiator as a cooling affect and not to show it off.. a dry kit purging isnt even nesecary(sp?) is it. its if you go with a wet set up youd want to purge?
FYI, momentary cooling of a purge isn't going to make any difference because it only soaks up a relatively small amount of heat.