, and get a 15lb. bottle for it cause you will need it....
how the HELL
Originally Posted by 70Stang
I feel so honored!!
That purge is using a SMALL NOS solenoid and some metal brake line....
DO NOT listen to all this "Master blaster" special purge stuff....seriously, that is the small Super Powershot NOS noid.
PM me if you want some more pics of the set up...I can give you whatever info I can think of...
That purge is using a SMALL NOS solenoid and some metal brake line....
DO NOT listen to all this "Master blaster" special purge stuff....seriously, that is the small Super Powershot NOS noid.
PM me if you want some more pics of the set up...I can give you whatever info I can think of...
Dave
FormerVendor
Joined: Apr 2005
Posts: 864
Likes: 0
From: Wichita Falls,Tx
You don't need a huge solenoid and line to get a big plume when purging. The biggest and tallest plumes I have seen have been from small solenoids (our standard purge solenoid or something comparable). Flaring the end of the purge line helps, but humidity is the biggest key to have a big plume. It has already been mentioned but I will repeat it, in the picture you'll notice that it is wet outside like it had just rained (ie: lots of humidity). That is probably the reason for such a large plume.
FormerVendor
Joined: Apr 2005
Posts: 864
Likes: 0
From: Wichita Falls,Tx
Dave,
I was merely stating what I have seen. It does not take the biggest baddest solenoid to make a huge plume. Granted, a larger solenoid is going to release more nitrous (duh), but it doesn't have to be a big solenoid to get a big plume. If you want to see some unreal looking purges just take a look at some of the King of the Hill racers. A few of them use Super Shark solenoids for their purge and waste 1/2 of a 15lb bottle just purging, but it looks cool having a 25-30ft purge. But it just isn't practical on the street.
I guess I should have said "some of the biggest and tallest I have seen". My bad Dave.
I was merely stating what I have seen. It does not take the biggest baddest solenoid to make a huge plume. Granted, a larger solenoid is going to release more nitrous (duh), but it doesn't have to be a big solenoid to get a big plume. If you want to see some unreal looking purges just take a look at some of the King of the Hill racers. A few of them use Super Shark solenoids for their purge and waste 1/2 of a 15lb bottle just purging, but it looks cool having a 25-30ft purge. But it just isn't practical on the street.
I guess I should have said "some of the biggest and tallest I have seen". My bad Dave.
Thread Starter
Staging Lane
Joined: Jan 2005
Posts: 96
Likes: 0
ok so i have another question...if i bought the "master blaster" and a 10lbs bottle, i would have show quality purge (huge plume snow machine)??? extra helpers would be Bottle heaters and such of course....
I say it doesn't amtter the size of the noid if you are using the same size line on the outlet side. now big noid big line diff story. I have used a 4an line b4 strait off the bottle and have done better ones with a small noid and brake line.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo FormerVendor
Joined: Apr 2005
Posts: 864
Likes: 0
From: Wichita Falls,Tx
MuscleHud- The "Super Dooper Big Show" is kinda a joke between Dave and I, but he said he would sell it if people wanted it. It consists of using a NX Super Shark solenoid (as far as I know it is the biggest solenoid on the market). It is capable of supporting 1200hp, so it definately flows a ton of nitrous. It also has two outlets on it so you can run a dual vent sent up. You would probably want to use 1/4 stainless for the vent tube and flair the end of it. Dave's website is www.nitrousoutlet.com, and his number is 1-866-648-7637.
I'm gonna make a Super Super Duper Biggy Show kit using a 20 gallon tank and 1/2 inch line...and it will suprise the heck out of the people in the stands...
...when it sprays water all over them!
...just messing...it's a "cool" idea though for these hot summers!
...when it sprays water all over them!
...just messing...it's a "cool" idea though for these hot summers! Thread Starter
Staging Lane
Joined: Jan 2005
Posts: 96
Likes: 0
purges 8.8lbs in 10 seconds????????? holy crap thats insane!!! im gonna need a bigger bottle lol cuz a ten lbs bottle wont be enuf! that MAY be a little much...but what the hell lol YES awesome...cant wait to see the price!
Thread Starter
Staging Lane
Joined: Jan 2005
Posts: 96
Likes: 0
Originally Posted by Nitro Dave's Nitrous Outlet
Notice the wet ground in this picture? The humidity played a huge role in why the purge was so high.
Dave
Dave
what size noid is this?? jw and is there any pics or vids of the super dooper big show purge??? kinda would like an idea of what im getting into lol trying to decide...8.8lbs in 10 sec is a lot of dough for one show but it sounds like its worth it! if i like the pics and the price is right ill buy it right here and now