Can you make a reg. bottle heater a remote bottle heater? How?
What is a good remote bottle opener?

 

Splice wires.
Extend wires.
Done.

 

Yes all you will need is the transducer.We sell them here.As for the Bottle Opener.Nitrous Express makes the best one on the market.
Dave

 

thanks guys

 

Here is the best transducer on the market:

http://www.dynotunenitrous.com/store...p?idproduct=43

Here is a little info:
The Dynotune transducer kicks back on when the pressure drops by 50 PSI so if it set at 1050 if the pressure drops to 1000 it kicks back on. It is fully adjustable to the pressure you want. The NX is preset at 1050 I think I could be off by 50 either way and then has to drop by 150 PSI before it kicks back on. Dont get me wrong NX makes great products - if you go with one of their products you will be happy. If you want the best than Dynotune is it.

Compare this to the NX opener and you decide!

http://www.dynotunenitrous.com/store...p?idproduct=16

http://www.dynotunenitrous.com/stor...sp?idproduct=16

> Full Billet constuction
> Quick release head, no tools needed to remove the opener!
> Open access to all ports
> Built in carry handle
> Drive gear doubles as manual valve handle!
>Four motor mounting locations

Good luck!

Dean