need help wireing
#1
12 Second Club
Thread Starter
Join Date: Apr 2005
Location: las cruces, new mexico
Posts: 800
Likes: 0
Received 0 Likes
on
0 Posts
need help wireing
i have a custom wet kit and i can't get my solinoids to click open with the wot switch. i have the jimmy jams activation and wot switch. i have a msd digital window switch but i didn't have it hooked up. i used a diagram i got on this site and no luck. could it be the window switch not being connected and it does not complet the circuit?, also what 12v source did you guys tap into?
Thanks
Eric.
Thanks
Eric.
#2
TECH Senior Member
iTrader: (23)
Join Date: Aug 2005
Location: Watertown, NY
Posts: 8,797
Likes: 0
Received 0 Likes
on
0 Posts
I used the positive post by the fuseblock on the drivers side under the hood, for the ignition switched 12V I used the fuse panel near the drivers door. There is ignition switched power off I believe the leftmost second fron bottom contact. Go to nitrous express site, they have great wiring diagrams there, i used them and mine worked fine on the first wiring.