LS1TECH - Camaro and Firebird Forum Discussion

Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Wiring help

Thread Tools
 
Search this Thread
 
Old Sep 10, 2005 | 11:14 PM
Share
  #1  
BlownChevySS's Avatar
BlownChevySS
Thread Starter
Launching!
iTrader: (1)
 
Joined: Jan 2005
Posts: 298
Likes: 0
From: SOFLO
Default Wiring help
I was wondering if there was a way to hook up the nx without the relay? 40 bucks for a relay is crazy!!!
Reply
0
Old Sep 10, 2005 | 11:26 PM
Share
  #2  
white2001s10's Avatar
white2001s10
TECH Fanatic
iTrader: (4)
 
Joined: May 2002
Posts: 1,851
Likes: 0
From: Fairview Heights Illinois
Default
Originally Posted by BlownChevySS
I was wondering if there was a way to hook up the nx without the relay? 40 bucks for a relay is crazy!!!
Always use a relay. Radio shack or walmart usually sells them for $5 or $10.
Reply
0
Old Sep 11, 2005 | 01:56 PM
Share
  #3  
Matt@HSW's Avatar
Matt@HSW
FormerVendor
iTrader: (14)
 
Joined: Jun 2005
Posts: 2,056
Likes: 0
From: Glenolden, PA
Default
Radio Shack relay will work. Or if you want one with a wire harness we have a 40 amp one for $18.95.

http://www.harrisspeedworks.com/shop...cat=312&page=1

Matt
Reply
0
Old Sep 14, 2005 | 05:58 PM
Share
  #4  
BlownChevySS's Avatar
BlownChevySS
Thread Starter
Launching!
iTrader: (1)
 
Joined: Jan 2005
Posts: 298
Likes: 0
From: SOFLO
Default
I was told I need a 60 or higher amp relay. So a 40 or 30 will work?
Reply
0
Old Sep 14, 2005 | 08:31 PM
Share
  #5  
Matt@HSW's Avatar
Matt@HSW
FormerVendor
iTrader: (14)
 
Joined: Jun 2005
Posts: 2,056
Likes: 0
From: Glenolden, PA
Default
60 amp? What are you trying to hook up?

Matt

Originally Posted by BlownChevySS
I was told I need a 60 or higher amp relay. So a 40 or 30 will work?
Reply
0
Old Sep 16, 2005 | 03:47 PM
Share
  #6  
BlownChevySS's Avatar
BlownChevySS
Thread Starter
Launching!
iTrader: (1)
 
Joined: Jan 2005
Posts: 298
Likes: 0
From: SOFLO
Default
I printed out the install manual from nx and in them it has a 60 amp relay as part of the gear. The only thing getting hooked up are the fuel, nos, and purge solenoids.
Reply
0
Old Sep 16, 2005 | 04:25 PM
Share
  #7  
SSDriver's Avatar
SSDriver
TECH Enthusiast
iTrader: (2)
 
Joined: Sep 2002
Posts: 568
Likes: 0
From: Burbank, CA
Default
You wont need anthing larger than 30-40 amp. I was running a 40 amp relay with a 30 amp fuse on my DP kit that has 2 nitrous, 2 fuel, and 1 pruge solinoid with no problems at all.

-William
Reply
0
Back to Subforum
Nitrous Oxide
View Next Unread
What will a 26lb inj and stock pump support




Advanced Search

All times are GMT -5. The time now is 07:35 PM.