DYNO Black Smoke out exhaust when let off gas after WOT
10-07-2005, 05:27 AM
#21
11 Second Club
Join Date: Nov 2001
Location: NE PA
Posts: 1,320
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2001 Red Coupe Bandit
There is ratlling now when started, so a piston is gone or a rod is bent. Either way I think there is no doubt that it is time for a new motor 
At least it happened near the end of the season and not the end. Hopefully, you can get things squared away over the winter months and be back on the road for next year.
10-07-2005, 06:47 AM
#23
TECH Enthusiast
Thread Starter
Join Date: Jul 2002
Location: Dallas, TX
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
It isn't $12K. But it will be expensive. LPE has a 346 block with forged Pistons for $2,095 blueprinted. Plus you send in your core, otherwise it is another $800. Shipping is $400 round trip as well so it gets expensive quick.
Here is the block:
http://www.lingenfelter.com/pack_ce_350.htm
The labor costs money as well. We will see.
Here is the block:
http://www.lingenfelter.com/pack_ce_350.htm
The labor costs money as well. We will see.
10-07-2005, 07:07 AM
#24
11 Second Club
Join Date: Aug 2003
Location: Boring Green, Kentucky
Posts: 1,538
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2001 Red Coupe Bandit
It isn't $12K. But it will be expensive. LPE has a 346 block with forged Pistons for $2,095 blueprinted. Plus you send in your core, otherwise it is another $800. Shipping is $400 round trip as well so it gets expensive quick.
Here is the block:
http://www.lingenfelter.com/pack_ce_350.htm
The labor costs money as well. We will see.
Here is the block:
http://www.lingenfelter.com/pack_ce_350.htm
The labor costs money as well. We will see.
No LS7??!!
Well, the timing of this is kind of ironic. After 7 years of being skeered of n2o, I'm dropping it in Sunday
Oh well.Good luck with the rebuild Bandit.
10-07-2005, 07:33 AM
#25
TECH Addict
iTrader: (24)
Join Date: Jun 2003
Location: St Joe, MO
Posts: 2,645
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2001 Red Coupe Bandit
It isn't $12K. But it will be expensive. LPE has a 346 block with forged Pistons for $2,095 blueprinted. Plus you send in your core, otherwise it is another $800. Shipping is $400 round trip as well so it gets expensive quick.
Here is the block:
http://www.lingenfelter.com/pack_ce_350.htm
The labor costs money as well. We will see.
Here is the block:
http://www.lingenfelter.com/pack_ce_350.htm
The labor costs money as well. We will see.
Texas speed has a good deal going on for a forged 347 (bandwagon hat off)
acceleration, black, deccelerate, decelarate, dyno, exhaust, gas, letting, lq9, ls1, rapid, smoke, smokes, smoking, supercharged
