Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

window switch

Thread Tools
 
Search this Thread
 
Old Oct 14, 2005 | 11:38 PM
  #1  
darrell hoagland's Avatar
Thread Starter
TECH Enthusiast
iTrader: (24)
 
Joined: Apr 2005
Posts: 538
Likes: 0
From: madisonville ky
Default window switch

so if i run a window switch i dont have to have wide open switch
Reply
Old Oct 15, 2005 | 02:36 AM
  #2  
LoWeLL216's Avatar
TECH Apprentice
iTrader: (1)
 
Joined: Oct 2003
Posts: 328
Likes: 0
From: San Diego, CA
Default

You should still run a WOT switch even with a window switch. You should only spray at WOT (which I'm sure you already know). The window switch does know if you're at WOT or not, it just reads your rpms. So you could be at half throttle and as long as your rpms climb high enough the window switch lets the system fire. That would be bad...
Reply
Old Oct 15, 2005 | 02:37 AM
  #3  
LoWeLL216's Avatar
TECH Apprentice
iTrader: (1)
 
Joined: Oct 2003
Posts: 328
Likes: 0
From: San Diego, CA
Default

Originally Posted by LoWeLL216
You should still run a WOT switch even with a window switch. You should only spray at WOT (which I'm sure you already know). The window switch does know if you're at WOT or not, it just reads your rpms. So you could be at half throttle and as long as your rpms climb high enough the window switch lets the system fire. That would be bad...
Does NOTknow if your at WOT is what I meant...
Reply
Old Oct 15, 2005 | 07:47 AM
  #4  
XTrooper's Avatar
11 Second Club
 
Joined: Nov 2001
Posts: 1,320
Likes: 0
From: NE PA
Default

Originally Posted by darrell hoagland
so if i run a window switch i dont have to have wide open switch
No, you still absolutely need a WOT switch otherwise, while your system is armed, it will always spray as long as you are within your rpm "window."

For example, my rpm window switch has its ON point at 3800 rpm and its OFF point at 6200 rpm. If I were at the drag strip without a WOT switch what would happen is that when I crossed the traps at 121+ mph @ 6000 rpm, my system would keep spraying even after I took my foot off the gas and was braking until my engine speed dropped below 3800 rpm! Not good!

To safely spray you need to be above 3000 rpm and at WOT.
Reply
Old Oct 15, 2005 | 09:26 AM
  #5  
darrell hoagland's Avatar
Thread Starter
TECH Enthusiast
iTrader: (24)
 
Joined: Apr 2005
Posts: 538
Likes: 0
From: madisonville ky
Default window switch

thanks
Reply
Old Oct 15, 2005 | 09:37 AM
  #6  
darrell hoagland's Avatar
Thread Starter
TECH Enthusiast
iTrader: (24)
 
Joined: Apr 2005
Posts: 538
Likes: 0
From: madisonville ky
Default window switch

should i run the switch that came with the kit its a wide open switch or should i but another kind
Reply
Old Oct 15, 2005 | 10:23 AM
  #7  
BlazerINtheWork's Avatar
Launching!
iTrader: (7)
 
Joined: Sep 2005
Posts: 201
Likes: 0
From: Jacksonville, FL
Default

what brand is it? i don't see why it wouldn't work, WOT switches are (relativly) simple
Reply
Old Oct 15, 2005 | 10:29 AM
  #8  
darrell hoagland's Avatar
Thread Starter
TECH Enthusiast
iTrader: (24)
 
Joined: Apr 2005
Posts: 538
Likes: 0
From: madisonville ky
Default window switch

It Is A Nx Kit Thanks
Reply
Old Oct 15, 2005 | 10:46 AM
  #9  
BadAssFast's Avatar
10 Second Club
iTrader: (2)
 
Joined: Dec 2004
Posts: 1,386
Likes: 1
From: Sumter, South Carolina
Default

Originally Posted by darrell hoagland
should i run the switch that came with the kit its a wide open switch or should i but another kind
If you mean a TPS electronic switch vs WOT position switch...use what you have makes sense to me...they achieve the same thing ie tellin you solenoids or solenoid control that you are at WOT.
Reply
Old Oct 15, 2005 | 11:18 AM
  #10  
LoWeLL216's Avatar
TECH Apprentice
iTrader: (1)
 
Joined: Oct 2003
Posts: 328
Likes: 0
From: San Diego, CA
Default

Originally Posted by darrell hoagland
It Is A Nx Kit Thanks
The switches are all pretty much the same. NX is a great kit. The do sell some that are prebent for and powdercoated for the LS1, but the electronics on it are just the same.
Reply
Old Oct 16, 2005 | 12:12 PM
  #11  
Zeus's Avatar
TECH Regular
 
Joined: Aug 2005
Posts: 470
Likes: 0
From: Home
Default

About the microswitch vs. TPS sensor issue, if you have the money I say TPS hands down. I just upgraded to a TPS and I'm really glad I did.
Reply
Old Oct 16, 2005 | 10:40 PM
  #12  
Nitro Dave's Nitrous Outlet's Avatar
FormerVendor
iTrader: (25)
 
Joined: Jun 2002
Posts: 12,283
Likes: 4
From: Waco, TX
Default

The WOT switch that comes in the system works fine.However we offer a custom billt bracket and micro switch that is on sale right now for 29.99. The next option would be the TPS switch.... Again what you have now will work just fine.Just telling you about other options.
Dave
Reply




All times are GMT -5. The time now is 09:12 PM.