My camera sux, sorry

 

Nice job

 

Nice, very clean install. I like your noid mount, as I do this also. have you got a chance to run it yet? times? dyno? Let us know.
Robert

 

thanx for the kindness, I'd tried to keep it as clean as possible..I hate wiring but i hate a rats nest of wiring more..I did take it out this past weekend and hit the 75 shot but just to ops check it, it didnt hit very hard but you could tell it was there, as soon as i get my wideband back I can finish tuning the motor (recent head install) and get the juice dialed in, but probably wont have any numbers till spring and I'll have the new cam in by then (TSP Torquer II), current cam is TR224 .563

 

Very nice work.

 

thanx

 

cute little one you got there

 

Looks good it's clean work
Hawk

 

thank you

 

damn! I see nothing but red x's from over here. What are you doing with the old cam?

 

I'm glad to see the MSD digital window switch on the passengers side. I was thinking it wouldn't fit? Things are getting tight on the drivers side. Good stuff.
- Macon

 

1. did u make ur noid bracket or did u buy it from one of the sponsors?
2. I've never seen someone install the nozzle directly on the MAF ends, I like that. do u have any pics of what it looks like inside and could u give a brief discription on how u did it? I'm going to a wet kit soon.

very nice install, I'm like u...I hate birds nest so IMO u have to try and make it as clean as possible. I also like how u hid the fuel line from the rail, rubber fuel hose under the intake/TB nice

 

1. made it
2. drill and tap with 1/8" npt
3. fuel line from rail is wrapped with wiring loom, mainly for abrasion resistance, it is routed under the t-body

i guess i can get pics of the inside if you really wanna see em

 

that sux...sellin it when i get it out

 

That looks good man

 

His is a 1/8 NPT tapped hole but there are 2 sizes, it also could be a 1/16 NPT. Ive been researching doing this too, the taps are hard to find in my town had to order it from one of our sponsors, just look under direct port stuff and they usually list the taps there. See this thread about this subject it might help a little too.
https://ls1tech.com/forums/nitrous-oxide/428749-wet-system-nozzle-mount-question.html

 

thanx

 

Thanks oange ss and WS6HUMMER

 

looks good.

 

thanx