Hey yall from experience is it easy to install a bottle warmer or should i leave it to the pro's?

 

I have an NX heater, works great and directions are very straight forward call Dave @ nitro daves nitrous outlet. http://www.nitrousoutlet.com/

 

You could most likley do it your self. If directions come with the heater its not too hard to do.

 

Heh. Mine plugs into the cigarette-lighter...can't get any easier than that.

 

They are pretty simple. I would suggest taking the time to do it yourself.

 

Heater installs are pretty straight forward. In my .02 a good DIY project.
Hawk

 

It's very simple, you should have no problems doing it at all. Let me know if you need one i'll give ya a heck of a deal

 

I have a Dyno Tune Nitrous heater and my mechanic has an NX...both were very straight forward. If you can figure out an easy relay circuit and run some wire to a switch etc. you can do it.

 

Yes the heaters are very easy to install. I suggest getting a good heater kit with a nice pressure switch. The only ones on the market I care for are the NX,860,Dynotune and our custom heater.

I would suggest any one of those heaters. I have looked them all over and they are good heaters..
Dave

 

If you need any advice even if its on something we do not sale feel free to hit me up.. The job is really simple. Every one of these heater kits have nice wiring diagrams.
Dave

 

cool thanks- i already ordered a dynotune fully adjustable/automated one- but im also gonna order a bottle blanket w/ money left over from exhaust install

 

That is a good heater. You will like it. If I can help with a blanket let me know.We carry the NX and the nOS blanket. If you need to know the differences in the units let me know also.
Thanks
Dave