Heads/Cam, 100 shot, and pump gas?
#1
On The Tree
Thread Starter
iTrader: (5)
Join Date: May 2004
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Heads/Cam, 100 shot, and pump gas?
Hey fellas.
Just have a quick question. Currently plan on putting heads on my cammed car and also spraying a 100 shot (dry) on top of that. With the heads my static compression ratio will be around 11:1. With that high of a compression will I be able to spray on pump gas (91 octane here in CA)?
I do plan on upgrading my fuel system to support the added power so I should be OK in that department.
Thanks for the help.
Brian
Just have a quick question. Currently plan on putting heads on my cammed car and also spraying a 100 shot (dry) on top of that. With the heads my static compression ratio will be around 11:1. With that high of a compression will I be able to spray on pump gas (91 octane here in CA)?
I do plan on upgrading my fuel system to support the added power so I should be OK in that department.
Thanks for the help.
Brian
#4
I have the same issue, I only wanna spray once in a while when I'm out on an open road, but dont want to drive around and waste my race in the mean time, I would like to use 91 octain pump gas over the expensive race gas but dont know if I should or could with a 100 shot, Maybe I could find a octain booster forumla.
Last edited by Oatmeal; 01-24-2006 at 11:34 PM.