camaross305

iTrader: (9)

which would you recomend for a nitrous newbie? i want something that is very reliable and at the same time gives me my bang for my buck. Aside from the kit i will also be purchasing a purge kit, msd window switch, wot switch, and solenoid bracket. Is there anything im missing? i plan on running a 125-150 wet shot so i dont think ill need to upgrade my fuel system or anything. thanks guys

ws6sojuiced01

iTrader: (1)

I would up grade the fuel pump with a 150 why take the chance it just the smarter thing to do.

camaross305

iTrader: (9)

which system do you recomend though?

Ls1Envy

iTrader: (6)

Nx Maf

cantdrv65

iTrader: (3)

The NX MAF is a nice piece and makes for a clean install, BUT so does the plate and it will also INCREASE NA horsepower. Id go with the plate...

ws6sojuiced01

iTrader: (1)

I also am going with NX maf

camaross305

iTrader: (9)

i also dont know if i should get a bottle heater or not...is it that crucial?

ws6sojuiced01

iTrader: (1)

to keep nitrous pressure up and get the most out of your bottle i would. but if you need to save the money then you could just do the hot water trick everytime you take it out. Just put the bottle under some worm water then watch you gauge rise to about 1000 or so then take it out.

cantdrv65

iTrader: (3)

Yes a bottle heater is crucial IMHO especially on a wet kit....

camaross305

iTrader: (9)

ok yea i was thinking instead of spending 150 on a bottle heater just get a fully automatic one for another 50 bucks.....what should the nitrous pressure be at about 1050 or so?

camaross305

iTrader: (9)

also will a 255 walbro be suitable for a 150 shot?

Matt@HSW

iTrader: (14)

It will be, just get a hotwire kit if you do a Walbro pump. If you want an easier solution take a look at the Racetronix kits.

Matt

Black X

iTrader: (9)

1 Vote for the Plate.
I just got th NOS plate and its amazing. From what I have been hearing Dave's plate is even better.

ws6sojuiced01

iTrader: (1)

my pressure switch if i remember right shuts down at 1150 PSI

camaross305

iTrader: (9)

ok so in the 1150-1050 range

ws6sojuiced01

iTrader: (1)

that a good pressure area but closer to the 1150 the better

camaross305

iTrader: (9)

ok cool thanks for all the info guys...my real problem is just deciding between the plate and nx maf....

camaross305

iTrader: (9)

also i was thinking about doing this for the pump situation and save some money instead of a racetronix kit...

harness
http://cgi.ebay.com/ebaymotors/1999-...spagenameZWDVW

pump
http://cgi.ebay.com/ebaymotors/Walbr...spagenameZWDVW

Matt@HSW

iTrader: (14)

It'll work. Depending on the year vehice you might have to mod the fuel pump bucket as that pump isn't a direct replacement.

Matt

camaross305

iTrader: (9)

oh ok i see....i have a 1999....but the racetonix kit is a direct replacement?