bottle size
01-30-2006, 03:46 PM
#2
TECH Fanatic
iTrader: (4)
Join Date: May 2002
Location: Fairview Heights Illinois
Posts: 1,851
Likes: 0
Received 0 Likes
on
0 Posts
The smallest I've ever used was a 5 lb, but I'm going to venture a guess that you could get at least one or two decent runs with a 2.5 lb & 75-shot.
When it come to bottle, bigger is always better though
When it come to bottle, bigger is always better though
01-31-2006, 11:02 AM
#5
LS1TECH Sponsor
iTrader: (13)
Join Date: Jul 2004
Location: Massachusetts
Posts: 1,766
Likes: 0
Received 0 Likes
on
0 Posts
Chris, we sell very small 10oz bottles. If you mount the noid right to the bottle and use teflon tubing(very small) you can make 75 last with the smaller bottles.
Our EFI bike kit is what you want. It will do 40-60HP on bikes but will work fine as a dry car kit. http://www.dynotunenitrous.com/store...?idproduct=141 Just keep the lines as short as possible.
Dan
Our EFI bike kit is what you want. It will do 40-60HP on bikes but will work fine as a dry car kit. http://www.dynotunenitrous.com/store...?idproduct=141 Just keep the lines as short as possible.
Dan
01-31-2006, 09:22 PM
#7
Originally Posted by DynotuneN2O
Chris, we sell very small 10oz bottles. If you mount the noid right to the bottle and use teflon tubing(very small) you can make 75 last with the smaller bottles.
Our EFI bike kit is what you want. It will do 40-60HP on bikes but will work fine as a dry car kit. http://www.dynotunenitrous.com/store...?idproduct=141 Just keep the lines as short as possible.
Dan
Our EFI bike kit is what you want. It will do 40-60HP on bikes but will work fine as a dry car kit. http://www.dynotunenitrous.com/store...?idproduct=141 Just keep the lines as short as possible.
Dan