Robert 56 come inside please
Robert 56 come inside please Tried the search but nothing came up i remember a while back you should your 1st gear lockout set up can you give me a pic,parts needed and a brief rundown on the wireing or a little scamatic
Thanx Chad
a.k.a BTLFEDSS
Thanx Chad
a.k.a BTLFEDSS
Here's the pic from my web. The base of the shifter is aluim and i tapped it for 8-32 machine screws. The sw I used is from Radio Hack, and it's the three pole type micro switch. The reason you want a 3-pole is the fact you'll run it in line with your wot micro sw, but wired backwards. meaning when wot sw is activated in first gear, your 1st lock out sw will still be open, until shifting out of first. you didn't mention if you were doing a dual stage, but in order to use this set-up for 1st gear and second stage only, some additional/diff wiring is needed. But, for a single stage it's really quite simple and in expensive. I have well over 100 runs using this and no problems at all. hope this helps.
Robert
Robert
