Bye-Bye Nitrous; hello Turbos
Thread Starter
TECH Veteran
iTrader: (13)
Joined: Nov 2001
Posts: 4,647
Likes: 1
From: Sioux Falls, SD
For those few that know me, just to let you know that I am leaving the ranks of nitrous and going to a twin turbo set-up. There's a trend in the Forced Induction section on the entire build.
It has been great running with you guys over the last 3-4 years. But, up to bigger and faster (hopefully).
Thanks again. Attached is a picture of the "twins".
David
It has been great running with you guys over the last 3-4 years. But, up to bigger and faster (hopefully).
Thanks again. Attached is a picture of the "twins".
David
Last edited by Navy David SS; Mar 10, 2006 at 03:40 PM.
Thread Starter
TECH Veteran
iTrader: (13)
Joined: Nov 2001
Posts: 4,647
Likes: 1
From: Sioux Falls, SD
I appreciate the comments on my new set up. There is an entire trend in the Force "I" section on the complete build. Just one heck of a build. The car has been built for this day starting 3 years ago. Only a matter of weeks now.
1fastWS6. Clean yes, easy: so, so; cheap: I only wish - the manifold is "cost" effective, the rest is on the spendy side. At least now I will not run out nitrous for the 3-day weekend
David
1fastWS6. Clean yes, easy: so, so; cheap: I only wish - the manifold is "cost" effective, the rest is on the spendy side. At least now I will not run out nitrous for the 3-day weekend

David
Trending Topics
Thread Starter
TECH Veteran
iTrader: (13)
Joined: Nov 2001
Posts: 4,647
Likes: 1
From: Sioux Falls, SD
Thanks.
I appreciate the offer on the blazer, but just don't need one. Have new GMC 2500 heavy duty for towing purposes.
Each of T67 will do 800hp - so a total of 1600hp possible. Our initial goal is 1000rwhp. Not sure that the tranny and rear-end will take much more than that - our for that matter this old man
David
I appreciate the offer on the blazer, but just don't need one. Have new GMC 2500 heavy duty for towing purposes.
Each of T67 will do 800hp - so a total of 1600hp possible. Our initial goal is 1000rwhp. Not sure that the tranny and rear-end will take much more than that - our for that matter this old man

David
Thread Starter
TECH Veteran
iTrader: (13)
Joined: Nov 2001
Posts: 4,647
Likes: 1
From: Sioux Falls, SD
02Vortech. Not after any street racer supras or porsche. I want to line up a digger at the track - or one of our "big-boy" door slammer, and give them a run for their money.
The SS was pulled off the street a couple years ago - exhaust was just nasty and our cops are just waiting for something like my car. With the turbo set up it will be put back on the street - very limited of course.
I appreciate everyone's interest in this build. It has been very exciting, with a lot more coming soon.
David
The SS was pulled off the street a couple years ago - exhaust was just nasty and our cops are just waiting for something like my car. With the turbo set up it will be put back on the street - very limited of course.
I appreciate everyone's interest in this build. It has been very exciting, with a lot more coming soon.
David



lol