Bottle mount...the way "I" like it!
Thread Starter
Joined: Nov 2001
Posts: 10,023
Likes: 6
From: LT1 land...the "409" of the 90s!
Bottle mount...the way "I" like it! Took some work and one running change and well....lets face it money!
Pics first...
Ver : 1.0
all was well untill I tried to install it...then
Ver : 1.1
I had to move the Aerospace forward on the 860.
I used the following
860 F-body mounting plate kit
Aerospace Billet Bottle Brackets with support rod's
four Stainless 5/16th x 1in bolts
four Stainless 5/16th x 3/4in bolts
I really like the way it turned out and changing bottles is fast and easy!
Pics first...
Ver : 1.0
all was well untill I tried to install it...then
Ver : 1.1
I had to move the Aerospace forward on the 860.
I used the following
860 F-body mounting plate kit
Aerospace Billet Bottle Brackets with support rod's
four Stainless 5/16th x 1in bolts
four Stainless 5/16th x 3/4in bolts
I really like the way it turned out and changing bottles is fast and easy!
Trending Topics
Thread Starter
Joined: Nov 2001
Posts: 10,023
Likes: 6
From: LT1 land...the "409" of the 90s!
Thanks guy.
....And Robert? The whole Idea was to be able to swap in a freash bottle every round if I had to
I have a few extra Bottles laying around
....And Robert? The whole Idea was to be able to swap in a freash bottle every round if I had to
I have a few extra Bottles laying around 
Looks great, that 860 plate would have been nice to have, then I wouln't have to had to make mine.
http://www.organ1zedcha0s.com/z28/ni...en%2010lbs.jpg
http://www.organ1zedcha0s.com/z28/ni...en%2010lbs.jpg
Thread Starter
Joined: Nov 2001
Posts: 10,023
Likes: 6
From: LT1 land...the "409" of the 90s!
Originally Posted by 860 Performance
That looks nice.
I've never seen the plate used with the Aerospace bracket before.
Vinny
I've never seen the plate used with the Aerospace bracket before.
Vinny
I bought that plate with EXACTLY that setup in mind. If I get a chance I will make a lay out of the holes and send them to you for future use
BTW the Sticker is "our" company Logo and is not affiliated with any of the parts used. It just seemed like a good place to use it. I hope the Suppliers were not offended
When Ever possible we install parts from site Sponsors and recomend them as much as we can 
Thread Starter
Joined: Nov 2001
Posts: 10,023
Likes: 6
From: LT1 land...the "409" of the 90s!
Originally Posted by NXJeremy
Looks great Ellis. I'm guessing that is the bottle setup that is meant to be shown off .
.I figure everyone will want to look at it
"Nothing to see here folks move along and look at the nice twin Nossle sytem up front "
FormerVendor
Joined: Apr 2005
Posts: 864
Likes: 0
From: Wichita Falls,Tx
Originally Posted by TwoFast4Lv
I figure everyone will want to look at it
"Nothing to see here folks move along and look at the nice twin Nossle sytem up front "
"Nothing to see here folks move along and look at the nice twin Nossle sytem up front "
