Hey guys, This is what I have come up with and I just wanted to make sure everything is correct..

Here is what i have-
NX Throttle Position Sensor Activation Switch
NX Relay
MSD RPM Activated window Switch

Here is the wiring i came up with-

TPSAS-
Pink--->Red on Relay
Red--->ACC Switch
Black--->Ground
White--->Blue Wire on TPS

Relay-
Black--->12 Volt
Green--->Solenoids
Red--->Pink on TPSAS
White--->Yellow on MSD

MSD-
Red--->ACC Switch
Yellow--->White on Relay
Black--->Ground
White--->Pin 10 on PCM

Please tell me if this sounds right or if any changes should be made..