Angle of bottle question?
Thread Starter
10 Second Club
iTrader: (22)
Joined: Mar 2006
Posts: 3,677
Likes: 2
From: Northwest side of Chicago
Angle of bottle question? Hey guys i have my 10 pounder mounted in the back seat area inbetween the rear seat. its at a 10 degree angle and i was wondering it that was enough.
also is it possible to have 1000 psi and no nitrous left? thanx for the help.
also is it possible to have 1000 psi and no nitrous left? thanx for the help.
Originally Posted by SPRAYED 01
Hey guys i have my 10 pounder mounted in the back seat area inbetween the rear seat. its at a 10 degree angle and i was wondering it that was enough.
also is it possible to have 1000 psi and no nitrous left? thanx for the help.
also is it possible to have 1000 psi and no nitrous left? thanx for the help.
If you heat it for a long time, you might be able to hit 1000 psi.
IMO a 10* angle isn't enough. i had a friend mount his on the driveshaft tunnel between the seats. after about 2 runs, it gave up. not enough angle. after he raised the front to at least 30*, he was good for almost the whole bottle. once you get to about 2 lbs left, it gets real hard to get the pressure up. most of the time when i'm out, i can't get above 800psi.
