Hey guys i have my 10 pounder mounted in the back seat area inbetween the rear seat. its at a 10 degree angle and i was wondering it that was enough.
also is it possible to have 1000 psi and no nitrous left? thanx for the help.

 

If you are using the bottle mounts that come with the kit & mount them pretty well straight in comparison to each other, you should have a good angle.
If you heat it for a long time, you might be able to hit 1000 psi.

 

IMO a 10* angle isn't enough. i had a friend mount his on the driveshaft tunnel between the seats. after about 2 runs, it gave up. not enough angle. after he raised the front to at least 30*, he was good for almost the whole bottle. once you get to about 2 lbs left, it gets real hard to get the pressure up. most of the time when i'm out, i can't get above 800psi.

 

10* is not enough on the bottle for my .02. I think the least recommended
is 15*. I'm sure some one else will give thier .02.
Hawk