LS1TECH - Camaro and Firebird Forum Discussion
LS1-LS2-LS3-LS6-LS7 PERFORMANCE
Nitrous Oxide
Simple Ramcharger Question

Nitrous Oxide Installation | Tuning | Products

Sponsored by:

Simple Ramcharger Question

Reply Subscribe

Search this Thread

Old

Apr 17, 2006 | 10:27 AM

#1

Thread Starter

TECH Junkie

iTrader: (19)

Joined: Feb 2005

Posts: 3,155

Likes: 0

From: Sandusky, Ohio

Default

Simple Ramcharger Question

hey guys,

i'm swapping out my clutch, so i figured with the Tranny out of the way, NOW would be a good time to connect my Ramcharger timing tuner.

My question is, where does it plug into the crank sensor? I'm underneath the car, looking up, but i'm not sure which sensor i'm supposed to plug into

does anybody have a pic?

There are 2 plugs on the back of the block, basically 12 o'clock from the clutch

just wondering which one to plug into

thanks!

Old

Apr 17, 2006 | 11:20 AM

#2

FormerVendor

iTrader: (14)

Joined: Jun 2005

Posts: 2,056

Likes: 0

From: Glenolden, PA

Default

It's on top of the starter on the pass side. You might have to drop the starter down to get to it.

Matt

Quote:

Originally Posted by MetallicaMatt

hey guys,

i'm swapping out my clutch, so i figured with the Tranny out of the way, NOW would be a good time to connect my Ramcharger timing tuner.

My question is, where does it plug into the crank sensor? I'm underneath the car, looking up, but i'm not sure which sensor i'm supposed to plug into

does anybody have a pic?

There are 2 plugs on the back of the block, basically 12 o'clock from the clutch

just wondering which one to plug into

thanks!

Old

Apr 17, 2006 | 11:44 AM

#3

Thread Starter

TECH Junkie

iTrader: (19)

Joined: Feb 2005

Posts: 3,155

Likes: 0

From: Sandusky, Ohio

Default

thanks matt

do you happen to have a pic? i just want to make sure i'm in the right neighborhood

Old

Apr 17, 2006 | 02:56 PM

#4

FormerVendor

iTrader: (14)

Joined: Jun 2005

Posts: 2,056

Likes: 0

From: Glenolden, PA

Default

I don't, but it's the only plug up there with 4 contacts on it. You should see it as soon as the starter is out of the way.

Matt

Old

Apr 18, 2006 | 11:19 PM

#5

8 Second Club

iTrader: (13)

Joined: Dec 2003

Posts: 1,015

Likes: 103

From: Battle Ground, WA

Default

Drop the starter. (Disconect battery first) You can't miss it.
BTW: Careful on the rounting, you are going to be really close to the header.

Old

Apr 19, 2006 | 04:10 PM

#6

Thread Starter

TECH Junkie

iTrader: (19)

Joined: Feb 2005

Posts: 3,155

Likes: 0

From: Sandusky, Ohio

Default

dropping the starter is a 'must'?

pain in the @$$?

Old

Apr 19, 2006 | 04:53 PM

#7

FormerVendor

iTrader: (14)

Joined: Jun 2005

Posts: 2,056

Likes: 0

From: Glenolden, PA

Default

Unless you have real small hands I say yes. Two bolts to take it out, pretty easy.

Matt

Quote:

Originally Posted by MetallicaMatt

dropping the starter is a 'must'?

pain in the @$$?

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Show Printable Version

Email this Page

Email this Page

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 05:14 AM.