Flow testing.
Thread Starter
10 Second Club
iTrader: (19)
Joined: Feb 2004
Posts: 2,542
Likes: 2
From: Alexandria La.
Flow testing. Whats the safest and most reliable way to flow test a nozzle? I just wanna make sure everything is coming out right before I stick it down my motor's throat.
I bench Flowed Dave's Plate, I used wood to protect it in the vice.
The Nozzles I made a Sheet metal shape similiar to the Blackwing to represent the angles and distance they would be at.
I wired the bottle heater up and set it for 1050, heated it up and flowed em.
Here is the vid
Plate and Nozzle flow test
The Nozzles I made a Sheet metal shape similiar to the Blackwing to represent the angles and distance they would be at.
I wired the bottle heater up and set it for 1050, heated it up and flowed em.
Here is the vid
Plate and Nozzle flow test
Thread Starter
10 Second Club
iTrader: (19)
Joined: Feb 2004
Posts: 2,542
Likes: 2
From: Alexandria La.
Originally Posted by Beer99C5
I bench Flowed Dave's Plate, I used wood to protect it in the vice.
The Nozzles I made a Sheet metal shape similiar to the Blackwing to represent the angles and distance they would be at.
I wired the bottle heater up and set it for 1050, heated it up and flowed em.
Here is the vid
Plate and Nozzle flow test
The Nozzles I made a Sheet metal shape similiar to the Blackwing to represent the angles and distance they would be at.
I wired the bottle heater up and set it for 1050, heated it up and flowed em.
Here is the vid
Plate and Nozzle flow test
