Have fun! 
Nitrous today!
Well its not going as smoothly as i thought
First of alll mounting the bottle in the location i want it (on that humb in the backseat area) is very difficult.
Second- I lost power on my drill so i couldnt finsh all the wireing to the inside of the car.
Third - I couldnt for the life of me find a good place for the WOT switch
but ill have pics probally late tonight or tommaorw.
hopefully i can get this boy out tonightt
Bill-
First of alll mounting the bottle in the location i want it (on that humb in the backseat area) is very difficult.
Second- I lost power on my drill so i couldnt finsh all the wireing to the inside of the car.
Third - I couldnt for the life of me find a good place for the WOT switch
but ill have pics probally late tonight or tommaorw.
hopefully i can get this boy out tonightt
Bill-
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo lol fkk yeah gotta love speed bumps to progress!
the middle hump thing slowed me down big times, had to make a ghetto raiser up to get the **** to clear the center part of the cupholders. and the WOT switch? cant decide to run it on the motor or under the pedal?
and got get fried out over little things, makes it more of a challenge....easy is boring!
cant wait to see the pix
the middle hump thing slowed me down big times, had to make a ghetto raiser up to get the **** to clear the center part of the cupholders. and the WOT switch? cant decide to run it on the motor or under the pedal?
and got get fried out over little things, makes it more of a challenge....easy is boring!
cant wait to see the pix
TECH Senior Member
iTrader: (42)
Joined: Dec 2004
Posts: 5,063
Likes: 0
From: Tomball/Nacogdoches TX
Here's some quick pics of my setup.
Here's how my WOT switch is mounted:
And I ghetto rigged my bottle by buying an electrical box normally used for electrical plugs for $3 at a local hardware store and mounted the front on top of that
Doesn't look that bad either.
Here's how my WOT switch is mounted:
And I ghetto rigged my bottle by buying an electrical box normally used for electrical plugs for $3 at a local hardware store and mounted the front on top of that
Doesn't look that bad either.
yeah... i got my kit before he even had them up on the site.... but i still haven't installed it.. i keep myself busy with the other things im doing to the car...
I figure it is better that way so i wont get to use the nitrous anytime soon.... and i wont be "upping" the shot anytime soon either.. lol
I figure it is better that way so i wont get to use the nitrous anytime soon.... and i wont be "upping" the shot anytime soon either.. lol
Well i got it all installed and sprayed a 75 shot but i was running rich and bottle pressure was down so it didnt hit that hard but i could tell it was hitting. were gonna get a wideband on it tommaorw and tune it a little and hopfully go to 100
(i want to go 150 but im gonna wait to get my plugs in 1st)
(i want to go 150 but im gonna wait to get my plugs in 1st)
Try to get a set of colder plugs in there before spraying it again and get the bottle pressure up to 950 ish psi. Any picts?
Matt
Matt
Originally Posted by LookinAtMyPlate
Well i got it all installed and sprayed a 75 shot but i was running rich and bottle pressure was down so it didnt hit that hard but i could tell it was hitting. were gonna get a wideband on it tommaorw and tune it a little and hopfully go to 100
(i want to go 150 but im gonna wait to get my plugs in 1st)
(i want to go 150 but im gonna wait to get my plugs in 1st)
Okay you all just answered my question I couldnt for the life of me figure out how to get the bottle right between the seats either. Thanks for the ghetto rig idea. Ill try to get it done and post a pic of it tomm. also