Ive been doing alot of reading, and kinda found everything around that section.

Car being worked on is a 03 Z06.

Ive found 2 different write ups, one saying #10 wire, the other #35 for Tach signal.

Also, do I have to cut the 2 wires and put the MSD WS box into 4cylinder mode, like people have to do for tachs?

Thanks.

 

# 10 is the tach signal on my car. And you do need to put it in 4 Cylinder mode, at least that's how I did it.

 

Ok cool, Ive always just sprayed through the shifts in all of my auto cars, so with his Manual, he wants a window switch. Last time I had a manual on the bottle I only used a WOT switch.

THanks.

 

it is #10 on 99 and up and #35 on the 98 or atleast that is what i was told when i did mine i have a 99 and i used 10 and it works like a champ i have the digital so i did not have to cut any wires just chaged it to 4 cly in the opions.

 

Does the #10 white wire refer to the PCM thats under the battery?? Thanks.