Wet kit on carb... without plate..
Thread Starter
Joined: Oct 2005
Posts: 2,336
Likes: 67
From: wyoming @ 12000 DA...
Wet kit on carb... without plate.. Could i use a normal Wet nozzle in a CARB application?
I was thinking running a seperate line from the fuel tank with a inline fuel pump to the fuel solenoid. Then im not sure where to mount the nozzle....
But would it work fine?
Cuz i am thinking about buying this First gen manual v8 s10 with low compression ad forged pistons... and i want to use my kit on it... without buying much...
any ideas?
I was thinking running a seperate line from the fuel tank with a inline fuel pump to the fuel solenoid. Then im not sure where to mount the nozzle....
But would it work fine?
Cuz i am thinking about buying this First gen manual v8 s10 with low compression ad forged pistons... and i want to use my kit on it... without buying much...
any ideas?
I would not use the nozzle. You will need a plate conversion. AS for the fuel system it looks like you have the general idea. However you will need a return off the regulater back to the tank to avoid a lean spike.
Dave
Dave
