Broke my filter trying to fix a leak (brute strength & ignorance) I need a fix by friday morning. Can you hook me up with a filter with a -4 on the inlet side & 1/4" or 1/8" npt male on the outlet side? This is the way I have mine setup, it screws directly into the noid (NX Iceman).

The noid is a 1/4" npt but I have an adapter to bring it down to an 1/8 so either would work. I will have to have this sent overnight?

Also I am running a 100 shot with your plate kit. It is pegging my WB at 10.0 or just above. Could I go with one size bigger with my N20 jet? Right now I have a 52 in there. I see on your web page that there is a 53.

 

Yes That should not be a probel.

Sounds like you need to go down on the fuel jet. Its to rich. I would start by going down about two jet sizes and tyhen seeing where you are.
Dave

 

call them tomorrow... I have never called, and not been able to talk to somebody. Their number is on their site.

 

Im glad you posted that. Thank you.. We have techs that sit here on the phone to help guys when they need the help most. Who really wants to get a a machine to leave a message on when trying to get instant help.
Dave

 

Yes, been very pleased with customer service by phone. Just wanted to post as well. I live in NW Montana and our car club is travelling 7 hours to a track in BFE this weekend (weather permitted). It's a big deal, & then I go & break the damn fitting.

 

The good thing is that since its all NPT a local store may have it.
But Call me tommorow if not and Ill fix you up.
Dave