just a quick question
Thread Starter
TECH Apprentice
iTrader: (2)
Joined: Jan 2006
Posts: 373
Likes: 0
From: Yelm, Washington
just a quick question I went to the track and ran a few runs with my new tires. the car hooked great off the line and throught the shift but I did not feel like the nitrous was working. I could feel it hit in first gear but could not tell if it was spraying in 2 and 3. I took the lid off the next day and my nozzel had rotated and was spraing strainght up (it is a dry kit that is sprying throught the lid). I put the nozzel right were the bend in the lid is going to the TB. my question is how much of the differance will it make with it sparying stright up onto the top of the lid rather then the usual way where it sprays straight into the TB.
Thread Starter
TECH Apprentice
iTrader: (2)
Joined: Jan 2006
Posts: 373
Likes: 0
From: Yelm, Washington
I am not nor will i ever be a damn okie 
That is MR. Texan to you!!! the best i have been able to pull was a 8.6 at 86 i know i should be running alot faster than that.
That is MR. Texan to you!!! the best i have been able to pull was a 8.6 at 86 i know i should be running alot faster than that. Trending Topics
Thread Starter
TECH Apprentice
iTrader: (2)
Joined: Jan 2006
Posts: 373
Likes: 0
From: Yelm, Washington
i have not run the quarter yet. Me and one of my buddies are planning on going up to thundervalley some time. right now i am trying to fix my car.
last night i was at the track and this time the car did the same, pulled hard in 1st did not feel it in 2 and then when i shifted into third the car almost died. I checked the plugs pulled two out and they look good and are TR6. i pulled the lid off just now and the nozzel had turned the other way again. when i ran with out nitrous i did not feel as strong in 1 but feet stronger in 2 and 3. does any one have any sugestion.
last night i was at the track and this time the car did the same, pulled hard in 1st did not feel it in 2 and then when i shifted into third the car almost died. I checked the plugs pulled two out and they look good and are TR6. i pulled the lid off just now and the nozzel had turned the other way again. when i ran with out nitrous i did not feel as strong in 1 but feet stronger in 2 and 3. does any one have any sugestion.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote Thread Starter
TECH Apprentice
iTrader: (2)
Joined: Jan 2006
Posts: 373
Likes: 0
From: Yelm, Washington
Originally Posted by rippenhard
Okay Mr. Texan what was your 1/4 time?
Thread Starter
TECH Apprentice
iTrader: (2)
Joined: Jan 2006
Posts: 373
Likes: 0
From: Yelm, Washington
yeah that is were me and my buddie when the last time i went to okc. I only got like 5 races before the police choppers showed up trying to find us. But they will never catch me!!