New setup - something a little different
Thread Starter
9 Second Club
iTrader: (2)
Joined: Jul 2002
Posts: 2,583
Likes: 1
From: on the dyno tuning in MD
New setup - something a little different I have been spraying my TNT F1 kit (150 shot) through the nozzles in front of my throttle body even after changing over to a Victor Jr and elbow. Its been working fine, but I decided to try something a little different. I put the Zex perimeter plate between my intake and elbow.
I'm still using my TNT solenoids re-plumbed to the plate. The distribution should be better with this setup and I will feel better about uping the shot over what I was spraying in front of the throttle body. Should know soon how it works out.
I'm still using my TNT solenoids re-plumbed to the plate. The distribution should be better with this setup and I will feel better about uping the shot over what I was spraying in front of the throttle body. Should know soon how it works out.
Thread Starter
9 Second Club
iTrader: (2)
Joined: Jul 2002
Posts: 2,583
Likes: 1
From: on the dyno tuning in MD
