lets see pics of everyones switch set up
Camaro Prototype, bought some purge and opener switches from NXRicky, and am going to try a Camaro panel with an opener next. Making some mid-November.
No cutting required
Coming to a Forum Sponsor or non-sponsor...Changing the font on the next run so its more legible.
One I am doing for GLMS, again the font will be changed for the labels.
The Vette full face requires some cutting of the factory console, I am probably changing to this style on my car my next panel run.
A Full face Blank for the diy type C-5 guy.
Also a full face Vette panel, waiting on Phil to send me pics of it installed.
No cutting required
Coming to a Forum Sponsor or non-sponsor...Changing the font on the next run so its more legible.
One I am doing for GLMS, again the font will be changed for the labels.
The Vette full face requires some cutting of the factory console, I am probably changing to this style on my car my next panel run.
A Full face Blank for the diy type C-5 guy.
Also a full face Vette panel, waiting on Phil to send me pics of it installed.
Last edited by Beer99C5; Nov 3, 2006 at 11:33 PM.
TECH Junkie
iTrader: (7)
Joined: Nov 2001
Posts: 3,378
Likes: 1
From: From the Bowels of Hell!!! You want some of me bitch?!?!?!
Built but never installed. Used computer switches, since they are 12v. The quarter slot has a computer red led fit flush in it that shows the system armed. The nickle slot has the arming switch. The dime slot has the purge. I used the 'reset' switch from a pc, here, because it is a momentary on switch. Good thing about this setup, besides being totally stealth, is that you can still put a coin in each slot and it still functions. Slide the quarter back a bit to check to see whether it is armed or not, and slide it back. This was to be used in a TOTALLY hidden dry system. Never used it though.
Pics are crappy, I know, but you get the idea.
Pics are crappy, I know, but you get the idea.
Originally Posted by Beer99C5
Camaro Prototype, bought some purge and opener switches from NXRicky, and am going to try a Camaro panel with an opener next. Making some mid-November.
No cutting required
Coming to a Forum Sponsor or non-sponsor...Changing the font on the next run so its more legible.
One I am doing for GLMS, again the font will be changed for the labels.
The Vette full face requires some cutting of the factory console, I am probably changing to this style on my car my next panel run.
A Full face Blank for the diy type C-5 guy.
Also a full face Vette panel, waiting on Phil to send me pics of it installed.
No cutting required
Coming to a Forum Sponsor or non-sponsor...Changing the font on the next run so its more legible.
One I am doing for GLMS, again the font will be changed for the labels.
The Vette full face requires some cutting of the factory console, I am probably changing to this style on my car my next panel run.
A Full face Blank for the diy type C-5 guy.
Also a full face Vette panel, waiting on Phil to send me pics of it installed.
Robert
BOSS APPROVED!
Made my own switch panel. Was originally gonna go with the Nitro Dave ashtray switch, but on my 2 & 4 shifts my **** hits the lid. So I just bought all the switches from Dave & made the panel shown below. I like the fact that it still retains the stock function & location.
