Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

HP Loss Through Prog. Controller.

Thread Tools
 
Search this Thread
 
Old Aug 2, 2006 | 12:58 PM
  #1  
jkz06's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Jan 2005
Posts: 46
Likes: 0
Default HP Loss Through Prog. Controller.

I was just wondering how much if any power you should lose through a progressive controller.
Reply
Old Aug 2, 2006 | 01:34 PM
  #2  
chris.shea's Avatar
TECH Apprentice
 
Joined: Sep 2004
Posts: 377
Likes: 0
From: Kona, Pearl Ridge
Default

you dont loose hp your just preventing 150hp from hitting all at once. if you ramp it for 1/2 second itl pulse the noids from 50% of your total shot or whatever till it reaches the full shot 100% 1/2 second later. how much are you spraying?
Reply
Old Aug 2, 2006 | 01:54 PM
  #3  
ls2formula's Avatar
Launching!
20 Year Member
iTrader: (7)
 
Joined: Nov 2001
Posts: 220
Likes: 0
Default

Originally Posted by jkz06
I was just wondering how much if any power you should lose through a progressive controller.
I have a Nos mini controller.When I was testing it at 99% (which they say is a 100%)the solenoids were still clicking.So I was wondering the same thing?
Reply
Old Aug 2, 2006 | 02:48 PM
  #4  
NXRICKY's Avatar
Closed ex-Sponsor Account
iTrader: (1)
 
Joined: Jul 2004
Posts: 2,797
Likes: 0
From: Wichita Falls, TX
Default

AS far as what a dyno will show depends on the ramping.

Was the unit "clicking" or just one click on?
Ricky
Reply
Old Aug 3, 2006 | 06:40 AM
  #5  
jkz06's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Jan 2005
Posts: 46
Likes: 0
Default

I'm not sure if it was clicking or not. I wasn't there when it was on the dyno, but I only got about 70rwhp out of my NX 100 shot.
Reply
Old Aug 3, 2006 | 08:51 AM
  #6  
NXRICKY's Avatar
Closed ex-Sponsor Account
iTrader: (1)
 
Joined: Jul 2004
Posts: 2,797
Likes: 0
From: Wichita Falls, TX
Default

hmmm, alot can throw that number off from air fuel, knock, when you hit it, and a controller that is progessing.

Ricky
Reply




All times are GMT -5. The time now is 01:48 AM.